Heating mat DEVI DEVIcomfort™ 150T (DTIR), 150 W/m², 5 m², 750 W, 83030576

DEVIcomfort™ 150T (DTIR) 83030576 is a high-quality self-adhesive twin-conductor electric heating mat designed for electric floor-heating systems in new-build and renovation projects.

This version covers 5.0 m². Mat dimensions are 0.5 × 10.0 m, nominal output is 150 W/m² and total nominal output at 230 V is 750 W.

DEVIcomfort™ 150T uses a round twin-conductor serial-resistive heating cable with 360° screening. Only one cold lead needs to be routed back to the thermostat, simplifying installation.

The supporting mesh is self-adhesive, helping the mat remain securely positioned on the prepared floor before embedding it in suitable tile adhesive, levelling compound or another material approved for electric floor heating.

The heating cable is only 4 mm thick, minimising the increase in finished floor height and making the system particularly suitable for renovation work.

The cable features FEP conductor insulation, a durable red PVC outer sheath and a 100% aluminium-foil screen with a 0.5 mm² tinned-copper drain conductor.

The supplied cold lead is a 2.3 m screened DTWB cable, 2 × 1.0 mm². Nominal supply voltage is 230 V AC.

Protection rating is IPX7. Maximum permissible powered temperature is 85 °C, maximum unpowered temperature is 90 °C, and minimum installation temperature is –5 °C.

Minimum bending diameter is 5 cm. Deformation strength is 600 N and pulling strength is 120 N.

The heating mat should be used together with a suitable thermostat to provide accurate temperature control, protection against overheating and economical energy consumption.

The heating cable must not be cut or shortened. When changing the laying direction, only the supporting mesh may be cut without damaging the heating cable.

DEVIcomfort™ 150T 83030576 is a reliable 5 m² electric floor-heating solution with 750 W total output, self-adhesive mesh, a thin 4 mm cable and a 20-year DEVI full-service warranty.

Key advantages

• 5.0 m² coverage.
• 150 W/m² output.
• 750 W total output.
• 0.5 × 10.0 m mat dimensions.
• Only 4 mm thick.
• Self-adhesive mesh.
• Twin-conductor cable.
• 360° screening.
• Single cold lead.
• 2.3 m cold lead.
• IPX7.
• Minimum installation temperature –5 °C.
• Maximum powered temperature 85 °C.
• 20-year full-service warranty.

Technical information