* Kaikki verkkokauppamme hinnat sisältävät 25,5 % arvonlisäveron.
TOPSANTEHNIKA.LV on virallinen jälleenmyyjä:
ARISTON LYDOS HYBRID 80L, vert. 3629052
Water heater ARISTON LYDOS HYBRID 80 is an easy-to-install class A water heater with a heat pump and two anti-corrosion protection products.
This water heater is used in bathrooms, showers or other places where hot water is needed. The internal tank, which has a volume of 80 liters, is protected against corrosion by 2 anodes. Compared to conventional B-class water heaters, this model saves up to 50% of energy thanks to the hybrid technology that combines electricity and heat pump energy.
Water is heated 15% faster than conventional heaters. And the indicator in the housing will tell you about the water heating. Connections are hidden inside the case.
Four operating modes:
"Green" - maximum power saving mode. The water temperature ranges from 40 to 53 °C without an electric heater. Electricity consumption will be only 200 W/h.
"i-Memory" - analyzes daily hot water consumption and adjusts it based on the user's habits. Operates on a balance of two energy sources.
"Boost" - accelerated water heating with a pump and an electric heater at the same time.
"Program" - two programs that run together or separately during the day. Preferably include a heat pump and optionally include an electric heater.
"Night" function - to reduce noise, the compressor is turned off at night.
"Cooling" - to prevent strong cooling of the room where the compressor is installed, the function turns it off.
Concealed removable tank
If it is not possible to connect a permanent drainage pipe. The volume of the tank is 6.3 liters.
Advantages of the water heater ARISTON LYDOS HYBRID 80:
4 operating modes.
2 corrosion protection.
Concealed removable tank.
There is a heat pump.
Smart energy saving.
Quick and easy installation.
Residual current device (RCD).
The protection system protects against electric shock.
Full compliance with all safety standards.
Body material: Metal
Heating type : Electricity
Type of heating element : Wet heater, Heat pump.
Heating time: 2 h. 34 min.
Water pressure: 0.2 to 8 bar
Tank capacity: 80 liters
Number of heating modes: 4
Max. water temperature: 75 C
Tank material: Stainless steel
Installation: on the wall, Vertical
Hot water connection: Bottom
Cold water connection: Bottom
Nominal power: 1.2 kW
Voltage: 230 V
Features : Protection against frost, Protection against overpressure, Protection against overheating, Display, Power control, Touch control panel
Warranty: 2 years
Internal tank warranty: 5 years
Country of manufacture : Italy
PARAMETERS :
Weight: 40.00 kg
Length: 47 cm
Width: 47 cm
Height: 102 cm