DRAŽICE OKCEV 100 electric water heater 98 l, 2.2 kW, horizontal

562.00 EUR  469.00 EUR

()

30-day lowest price:

Datu lapa

- +

Add to cart

Add to favorites

DRAŽICE OKCEV 100 Electric Water Heater 98 L, 2.2 kW, Horizontal, Energy Class C

DRAŽICE OKCEV 100 is a horizontal electric storage water heater with an actual capacity of 98 L and a 2.2 kW ceramic heating element. It is designed for domestic hot-water preparation in residential and other buildings where installation conditions require a horizontal wall-mounted water heater. The OKCEV range is available in 100, 125, 160 and 200 models and is supplied with mounting brackets.

One of the key advantages of the OKCEV range is its ceramic heating element, installed inside a protective thermowell and therefore not in direct contact with the stored water. This construction helps extend the service life of the heating element and simplifies maintenance. Heating is controlled by an operating thermostat, while a safety thermostat with thermal cut-out provides protection against overheating.

The inner tank is manufactured from steel and protected internally with an enamel coating. A magnesium anode provides additional corrosion protection. DRAŽICE states that the anti-corrosion layer used in the OKCEV range is resistant to pitting corrosion even in hard and chlorinated water. The tank is factory tested at 1.5 times its operating pressure.

The storage tank is insulated with polyurethane foam to reduce heat loss. DRAŽICE highlights high-quality Covestro insulation in the current OKCEV range for low heat loss and reduced operating costs.

The OKCEV 100 operates from a 230 V / 50 Hz single-phase supply and has a 2200 W heating element. Electrical protection is IP42. The adjustable temperature range is approximately 5–74 °C, maximum water temperature is 80 °C, recommended hot-water temperature is 60 °C, and maximum operating pressure is 6 bar.

The actual capacity of the DRAŽICE OKCEV 100 is 98 L. Heating water from 10 °C to 60 °C takes approximately 2.6 hours, while mixed-water volume V40 is 164.98 L. The model has an M load profile, energy efficiency class C, water-heating energy efficiency of 37% and annual electricity consumption of 1402 kWh. The energy-label thermostat setting is 55 °C, and the sound power level is 15 dB.

The OKCEV 100 is 902 mm long and 524 mm in diameter, with a maximum dry weight of 42 kg. Hydraulic connections use G 3/4" female threads, while horizontal mounting spacing is 450 mm. The manufacturer specifies horizontal fixing to a suitable supporting structure using the mounting brackets.

Main advantages

• Actual capacity 98 L
• Horizontal wall mounting
• 2.2 kW ceramic heating element
• Heating element not in direct contact with water
• Operating thermostat
• Safety thermostat / thermal cut-out
• Enamelled steel tank
• Magnesium anode
• Anti-corrosion protection suitable for hard and chlorinated water
• High-quality Covestro polyurethane insulation
• Temperature adjustment range 5–74 °C
• Maximum water temperature 80 °C
• Recommended hot-water temperature 60 °C
• Supply 230 V / 50 Hz
• Rated power 2200 W
• Protection rating IP42
• Maximum operating pressure 6 bar
• Heating time 10 → 60 °C — 2.6 h
• Mixed-water volume V40 — 164.98 L
• Energy efficiency class C
• Load profile M
• Water-heating energy efficiency 37%
• Annual electricity consumption 1402 kWh
• Energy-label thermostat setting 55 °C
• Sound power level 15 dB
• Length 902 mm
• Diameter 524 mm
• Dry weight 42 kg
• G 3/4" female water connections
• Mounting spacing 450 mm
• Mounting brackets supplied
• Safety valve and thermometer supplied
• Made in the Czech Republic

Technical information