DRAŽICE OKCE 200 electric water heater 199 l, 2.2 kW, vertical

752.00 EUR  640.00 EUR

Datu lapa

- +

Add to cart

DRAŽICE OKCE 200 Electric Water Heater 199 L, 2.2 kW, Vertical, Energy Class C

DRAŽICE OKCE 200 is a vertical electric storage water heater with an actual tank capacity of 199 L and a 2.2 kW ceramic heating element. It is designed for domestic hot-water preparation in residential and other buildings where a large hot-water reserve is required. The unit is designed for vertical wall mounting. The current DRAŽICE OKCE range includes 50, 80, 100, 125, 160 and 200 models.

One of the main advantages of the OKCE series is its ceramic electric heating element. The element is installed in a protective thermowell and is not in direct contact with the stored water. This construction helps reduce the direct impact of limescale on the heating element and simplifies maintenance. Heating is controlled by an operating thermostat with external temperature adjustment, while a safety thermostat with thermal cut-out protects the heater against overheating.

The inner storage tank is manufactured from steel and protected by an enamel coating. A magnesium anode provides additional electrochemical corrosion protection. DRAŽICE states that the anti-corrosion layer used in the OKCE range is resistant to pitting corrosion even in hard and chlorinated water. The tank is factory tested at 1.5 times its operating pressure.

High-quality polyurethane thermal insulation is installed between the steel tank and outer casing. DRAŽICE uses high-quality Covestro insulation in the OKCE range to minimise heat loss and operating costs.

The OKCE 200 operates from a 230 V / 50 Hz single-phase electrical supply. The ceramic heating element has a power input of 2200 W, the recommended circuit breaker is 16 A, and electrical protection is rated IP44. The adjustable temperature range is 5–74 °C, maximum tank operating temperature is 80 °C, recommended hot-water temperature is 60 °C, and maximum operating pressure is 6 bar.

The actual capacity of the DRAŽICE OKCE 200 is 199 L. Heating water from 10 °C to 60 °C takes approximately 5.3 hours. Mixed-water volume V40 reaches 331.26 L. The model has an XL load profile, energy efficiency class C, water-heating energy efficiency of 38% and annual electricity consumption of 4403 kWh.

The OKCE 200 is 1300 mm high and 584 mm in diameter, with a maximum dry weight of 66 kg. Water connections use G 3/4" male threads. Unlike the smaller OKCE models, the 200 L version uses upper and lower wall-mounting brackets with four anchor-bolt fixing points. Horizontal anchor spacing is 450 mm. A safety valve with check-valve function is supplied with the heater.

Main advantages

• Actual tank capacity 199 L
• Vertical wall mounting
• 2.2 kW ceramic heating element
• Heating element not in direct contact with water
• Operating thermostat with external temperature adjustment
• Safety thermostat / thermal cut-out
• Enamelled steel tank
• Magnesium anode for corrosion protection
• Anti-corrosion coating suitable for hard and chlorinated water
• High-quality Covestro polyurethane insulation
• Temperature adjustment range 5–74 °C
• Maximum operating temperature 80 °C
• Recommended hot-water temperature 60 °C
• Electrical supply 230 V / 50 Hz
• Rated heating power 2200 W
• Recommended circuit breaker 16 A
• Protection rating IP44
• Maximum operating pressure 6 bar
• Heating time 10 → 60 °C — 5.3 h
• Mixed-water volume V40 — 331.26 L
• Energy efficiency class C
• Load profile XL
• Water-heating energy efficiency 38%
• Annual electricity consumption 4403 kWh
• Height 1300 mm
• Diameter 584 mm
• Dry weight 66 kg
• G 3/4" male water connections
• Upper and lower wall-mounting brackets
• Four anchor-bolt fixing points
• Horizontal anchor spacing 450 mm
• Safety valve with check-valve function supplied
• Made in the Czech Republic

Technical information