
🚚 Delivery Price Calculator
Approximate price estimate · Prices include VAT
1. Select delivery country
2. Select item type
Estimated delivery price
—
⚠ Informational estimate only. Actual price may vary depending on item weight, dimensions and courier conditions. The seller reserves the right to issue an additional invoice. Contact us for exact pricing: +371 29287710 · [email protected]
📞 For exact pricing call: +371 29287710 or email [email protected]
🚚 Delivery Price Calculator
TOP SANTEHNIKA.LV official dealer:


* ESTO only in Estonia, Latvia, Lithuania
DRAŽICE OKCE 160 electric water heater 149 l, 2.2 kW, vertical

DRAŽICE OKCE 160 Electric Water Heater 149 L, 2.2 kW, Vertical, Energy Class C
DRAŽICE OKCE 160 is a vertical electric storage water heater with an actual tank capacity of 149 L and a 2.2 kW ceramic heating element. It is designed for domestic hot-water production in homes and other buildings where a larger hot-water reserve is required. The heater is intended for vertical wall mounting, and the OKCE series includes 50, 80, 100, 125, 160 and 200 models.
One of the main advantages of the OKCE range is its ceramic heating element, installed inside a protective thermowell and therefore not in direct contact with the stored water. This helps reduce the direct effect of limescale on the heating element and simplifies servicing. Heating is controlled by an operating thermostat, while a safety thermostat with thermal cut-out protects the heater against overheating.
The inner storage tank is manufactured from steel and protected with an enamel anti-corrosion coating. A magnesium anode provides additional corrosion protection. Polyurethane thermal insulation between the tank and outer casing helps reduce heat losses and maintain stored-water temperature.
The OKCE 160 operates from a 230 V / 50 Hz single-phase supply. Heating-element power is 2200 W, the recommended circuit breaker is 16 A, and electrical protection is rated IP44. Maximum operating temperature inside the tank is 80 °C, recommended hot-water temperature is 60 °C, and maximum operating pressure is 6 bar.
The actual capacity of the DRAŽICE OKCE 160 is 149 L. Heating water from 10 °C to 60 °C takes approximately 3.9 hours, while the mixed-water volume V40 is 242.83 L. The model has an L load profile, energy efficiency class C, water-heating energy efficiency of 39%, and annual electricity consumption of 2622 kWh.
The heater is 1255 mm high and 524 mm in diameter, with a maximum dry weight of 49 kg. Horizontal wall-anchor spacing for the OKCE series is 450 mm, maintained by DRAŽICE to simplify replacement of older heaters.
Main advantages
- Actual tank capacity 149 L
- Vertical wall mounting
- 2.2 kW ceramic heating element
- Heating element not in direct contact with water
- Operating thermostat
- Safety thermostat with thermal cut-out
- Enamelled steel tank
- Magnesium anode for corrosion protection
- Polyurethane thermal insulation
- Supply 230 V / 50 Hz
- Recommended circuit breaker 16 A
- Protection rating IP44
- Maximum operating temperature 80 °C
- Recommended hot-water temperature 60 °C
- Maximum operating pressure 6 bar
- Heating time 10 → 60 °C — 3.9 h
- Mixed-water volume V40 — 242.83 L
- Energy efficiency class C
- Load profile L
- Water-heating energy efficiency 39%
- Annual electricity consumption 2622 kWh
- Height 1255 mm
- Diameter 524 mm
- Dry weight 49 kg
- Mounting spacing 450 mm
- Safety valve as accessory
- Manufacturer DRAŽICE, Czech Republic
Technical information
| Parameter | Value |
|---|---|
| Manufacturer | DRAŽICE |
| Model | OKCE 160 |
| Product type | Electric storage water heater |
| Installation | Vertical, wall mounted |
| Actual capacity | 149 L |
| Heating element type | Ceramic |
| Heating element power | 2200 W |
| Electrical supply | 1/N/PE ~ 230 V / 50 Hz |
| Recommended circuit breaker | 16 A |
| Protection rating | IP44 |
| Maximum operating temperature | 80 °C |
| Recommended hot-water temperature | 60 °C |
| Maximum operating pressure | 6 bar |
| Tank material | Enamelled steel |
| Corrosion protection | Magnesium anode |
| Thermal insulation | Polyurethane |
| Heating time 10 → 60 °C | 3.9 h |
| Mixed-water volume V40 | 242.83 L |
| Load profile | L |
| Energy efficiency class | C |
| Water-heating energy efficiency | 39% |
| Annual electricity consumption | 2622 kWh |
| Height | 1255 mm |
| Diameter | 524 mm |
| Dry weight | 49 kg |
| Mounting spacing | 450 mm |
| Accessory | Safety valve |
| Country of manufacture | Czech Republic |