DRAŽICE OKCE 125 electric water heater 122 l, 2.2 kW, vertical

452.00 EUR  399.00 EUR

()

30-day lowest price:

Datu lapa

- +

Add to cart

Add to favorites

DRAŽICE OKCE 125 Electric Water Heater 122 L, 2.2 kW, Vertical, Energy Class C

DRAŽICE OKCE 125 is a vertical electric storage water heater with an actual tank capacity of 122 L and a 2.2 kW ceramic heating element. It is designed for domestic hot-water production in homes and other buildings where a reliable wall-mounted electric water heater with a larger hot-water reserve is required. The OKCE range includes 50, 80, 100, 125, 160 and 200 models.

One of the key advantages of the OKCE range is its ceramic heating element. The element is installed inside a protective thermowell and does not come into direct contact with the stored water, helping reduce the direct effect of limescale and simplifying maintenance. Heating is controlled by an operating thermostat, while a safety thermostat with thermal cut-out provides protection against overheating.

The inner tank is manufactured from steel and protected with an enamel anti-corrosion coating. DRAŽICE specifies that the anti-corrosion layer resists pitting corrosion even in hard and chlorinated water. A magnesium anode provides additional protection for the steel storage tank.

High-quality Covestro polyurethane thermal insulation is installed between the tank and outer casing to minimise heat loss and operating costs.

The OKCE 125 is designed for a 230 V / 50 Hz single-phase supply. Rated heating-element power is 2200 W, the recommended circuit breaker is 16 A, and electrical protection is IP44. The adjustable temperature range is 5–74 °C, while maximum tank operating pressure is 6 bar.

The actual capacity of the DRAŽICE OKCE 125 is 122 L. Heating water from 10 °C to 60 °C takes approximately 3.2 hours, while the mixed-water volume V40 reaches 231.10 L. The model has an M load profile, energy efficiency class C, water-heating energy efficiency of 36% and annual electricity consumption of 1409 kWh.

The heater is 1067 mm high and 524 mm in diameter, with a maximum dry weight of 43 kg. Water connections are G 3/4" male, while the horizontal wall-anchor spacing is 450 mm. DRAŽICE maintains this spacing across the OKCE range to simplify replacement of older heaters.

Main advantages

• Actual tank capacity 122 L
• Vertical wall mounting
• 2.2 kW ceramic heating element
• Heating element not in direct contact with water
• Operating thermostat
• Safety thermostat / thermal cut-out
• Enamelled steel tank
• Magnesium anode for corrosion protection
• Anti-corrosion layer suitable for hard and chlorinated water
• High-quality Covestro polyurethane insulation
• Adjustable temperature range 5–74 °C
• Maximum water temperature 80 °C
• Recommended hot-water temperature 60 °C
• Supply 230 V / 50 Hz
• Recommended circuit breaker 16 A
• Protection rating IP44
• Maximum operating pressure 6 bar
• Heating time 10 → 60 °C — 3.2 h
• Mixed-water volume V40 — 231.10 L
• Energy efficiency class C
• Load profile M
• Water-heating energy efficiency 36%
• Annual electricity consumption 1409 kWh
• Height 1067 mm
• Diameter 524 mm
• Dry weight 43 kg
• G 3/4" male water connections
• Mounting spacing 450 mm
• Safety valve supplied as standard accessory
• Manufacturer DRAŽICE, Czech Republic

Technical information