ATLANTIC STEATITE CUBE VM 100 S4 C electric water heater 100 l, 1.5 kW, vertical, class C, 861312

ATLANTIC STEATITE CUBE VM 100 S4 C is a vertical wall-mounted electric storage water heater with a 100-litre tank and a 1500 W / 1.5 kW dry STEATITE ceramic heating element. Its rectangular prism design allows convenient integration into bathrooms, utility rooms and furniture layouts.

ATLANTIC STEATITE technology uses a dry ceramic heating element installed inside an enamelled steel protective sleeve without direct contact with water. This construction limits direct limescale formation on the heating element and is suitable for hard, mineralised and aggressive water.

The dry STEATITE heating element can be replaced without draining the tank. This considerably simplifies periodic maintenance and reduces the time required for heating-element replacement.

The internal tank is manufactured from enamelled steel and protected by high-quality zirconium-enriched enamel. A magnesium anode provides additional electrochemical corrosion protection.

High-density polyurethane thermal insulation helps minimise heat loss and retain the temperature of heated water for longer. Heat loss at 65 °C is approximately 1.08 kWh/24 h.

A precise capillary thermostat provides stable water-temperature control. Temperature can be adjusted using the external regulator located on the water-heater casing.

Absence mode maintains the water temperature at approximately 7 °C, providing frost protection and helping reduce electricity consumption when hot water is not required for an extended period.

The hot-water outlet pipe is made of stainless steel. An optimised cold-water inlet diffuser is also used to help limit unnecessary mixing of incoming cold water with heated water inside the tank.

The water heater incorporates overheating protection and complies with the IP24 electrical protection rating. Maximum working pressure is 8 bar.

Heating 100 litres of water from 15 to 65 °C takes approximately 254 minutes or 4 hours 14 minutes. The model has an ErP energy efficiency class of C and a load profile of L.

The STEATITE CUBE features a rectangular, square-style white casing. The external temperature regulator and heating indicator provide straightforward everyday operation without complicated programming.

The model is designed for vertical wall mounting. Water connections are 3/4", the distance between water connections is 230 mm and the mounting-point spacing is 350/440 mm.

Technical information