ARISTON VELIS PRO DRY WIFI 50 EU 50 l 1.5 kW electric water heater with Wi-Fi, vertical/horizontal, 3100908

630.00 EUR  505.00 EUR

Datu lapa

- +

Add to cart

ARISTON VELIS PRO DRY WIFI 50 EU Electric Water Heater 50 L, 1.5 kW, Wi-Fi, Vertical/Horizontal, 3100908

ARISTON VELIS PRO DRY WIFI 50 EU is an ultra-slim electric storage water heater featuring DRY heating elements, integrated Wi-Fi connectivity and a twin-tank construction. For the exact product code 3100908, ARISTON's official European product information specifies an actual hot-water storage capacity of 50 litres, nominal power of 1.5 kW, 230 V power supply and wall installation in either a vertical or horizontal position. The EAN is 5411692150228.

The most important difference between VELIS PRO DRY WIFI and conventional VELIS PRO models is its DRY heating-element technology. The heating element is separated from direct contact with the water, helping reduce the direct effect of limescale on the heating element and simplifying servicing or replacement. ARISTON also highlights operating continuity: the twin heating-element arrangement is designed so hot-water production can remain available even if one element develops a fault.

Inside the appliance is a Twin Tank system comprising two enamelled-steel tanks connected in series. This arrangement enables the heater to retain a body depth of only 275 mm while providing rapid hot-water preparation. The unit can be wall-mounted vertically or horizontally; for horizontal installation, the water connections must be positioned on the left-hand side.

ARISTON uses a combined corrosion-protection solution for the storage tanks. The official Hungarian product page lists titanium/magnesium protection with two anodes, while the detailed Ukrainian technical specification identifies an active-anode solution, enamelled internal tank coating and polyurethane thermal insulation. These measures are intended to provide long-term tank protection while reducing standing heat loss.

VELIS PRO DRY WIFI 50 EU incorporates integrated Wi-Fi and Ariston NET support. From a smartphone, the water heater can be switched on or off remotely, operating modes and programmes can be selected, and electricity consumption can be monitored. This makes it possible to adapt hot-water preparation to the household's routine and avoid unnecessary heating when hot water is not required.

The intelligent ECO EVO function analyses the user's hot-water consumption habits and adapts heating to actual demand. The appliance aims to prepare only the required quantity of hot water at the time it is needed, helping reduce unnecessary electricity consumption. ARISTON identifies ECO EVO as one of the core energy-optimisation features of the model.

The water heater features an electronic touchscreen control interface for setting the desired water temperature. ARISTON also specifies an integrated ABS safety system, designed to intervene automatically in the event of electrical or hydraulic operating faults. The appliance is developed and tested according to ARISTON's defined quality and safety requirements.

For the VELIS PRO DRY WIFI 50, ARISTON specifies a full heating time of 1 hour 34 minutes at ΔT = 45 °C. The first 40 litres of water at 40 °C, sufficient for the reference first shower, are prepared in approximately 46 minutes. The declared V40 mixed hot-water output is 110 litres.

Maximum working pressure is 8 bar, maximum water temperature is 80 °C, and electrical protection is rated IPX4. The model has energy efficiency class B and a declared M load profile.

ARISTON's official model table specifies dimensions of 797 × 511 × 275 mm. The Hungarian product page lists a weight of 20 kg, while the detailed Ukrainian specification for product code 3100908 gives a net weight of 21.7 kg and gross weight of 23.77 kg. The detailed model-specific value of 21.7 kg is therefore used in the technical table below.

Main advantages

• ARISTON VELIS PRO DRY WIFI 50 EU
• Product code 3100908
• EAN 5411692150228
• Actual water capacity 50 L
• DRY heating elements
• Two independent heating elements
• Twin Tank construction
• Two enamelled-steel tanks
• Titanium/magnesium corrosion protection
• Active-anode protection system
• Polyurethane insulation
• Only 275 mm deep
• Vertical or horizontal wall installation
• Nominal power 1.5 kW
• 230 V power supply
• Integrated Wi-Fi
• Ariston NET remote control
• Remote switching on and off
• Remote mode and programme selection
• Electricity-consumption monitoring
• ECO EVO function
• Electronic touchscreen control
• ABS safety system
• First shower ready in approximately 46 minutes
• Heating time 1 h 34 min at ΔT = 45 °C
• V40 mixed hot-water output 110 L
• Maximum water temperature 80 °C
• Maximum working pressure 8 bar
• IPX4 protection
• Energy efficiency class B
• Load profile M

Technical information