
🚚 Delivery Price Calculator
Approximate price estimate · Prices include VAT
1. Select delivery country
2. Select item type
Estimated delivery price
—
⚠ Informational estimate only. Actual price may vary depending on item weight, dimensions and courier conditions. The seller reserves the right to issue an additional invoice. Contact us for exact pricing: +371 29287710 · [email protected]
📞 For exact pricing call: +371 29287710 or email [email protected]
🚚 Delivery Price Calculator
TOP SANTEHNIKA.LV official dealer:


* ESTO only in Estonia, Latvia, Lithuania
ARISTON VELIS PRO 50 V/H 45 l 1.5 kW electric water heater, vertical/horizontal, 3626135

ARISTON VELIS PRO 50 V/H Electric Water Heater 45 L, 1.5 kW, Vertical/Horizontal, 3626135
ARISTON VELIS PRO 50 is a compact, flat-design electric storage water heater designed for wall installation in either a vertical or horizontal position. For product code 3626135, ARISTON's official technical documentation identifies it as the 50-litre product category with an actual water-storage capacity of 45 litres. Therefore, the “40 L” currently used in the product title should preferably be corrected to 45 L actual capacity, or the manufacturer designation “VELIS PRO 50” can be retained.
VELIS PRO is distinguished by its exceptionally slim construction, with a depth of only 275 mm. This allows the water heater to be installed in locations where a conventional cylindrical storage heater would occupy too much space. ARISTON specifies that the unit can be wall-mounted either vertically or horizontally, providing considerable installation flexibility.
The VELIS PRO incorporates two cylindrical enamelled-steel tanks connected in series. This twin-tank configuration enables the characteristic flat design and contributes to faster preparation of the first usable quantity of hot water. The system uses two enamelled heating elements, while two magnesium anodes provide corrosion protection for the tanks.
For the VELIS PRO 50, ARISTON specifies a nominal power of 1.5 kW and a 230 V electrical supply. Official European specifications list two heating elements enamelled with an Incoloy alloy. The configuration is designed to heat the two-tank system efficiently while retaining the compact 27.5 cm overall depth.
One of the most practical advantages is the fast preparation of water for the first shower. ARISTON specifies approximately 46 minutes for the VELIS PRO 50 to prepare the first shower. Full heating time at ΔT = 45 °C is 1 hour 34 minutes, while at ΔT = 50 °C it is 1 hour 44 minutes.
VELIS PRO is equipped with a Soft Touch electronic control panel. The touch interface allows the desired water temperature to be selected and provides convenient electronic control of the appliance. This provides a more intuitive user experience than a conventional mechanical temperature selector.
The intelligent ECO EVO function analyses the user's hot-water consumption habits and adapts heating to actual demand. On its current official VELIS PRO page, ARISTON states that ECO EVO can provide energy savings of up to 15% compared with a conventional electric water heater when used under the intended operating conditions.
The two storage tanks are protected by two magnesium anodes, while polyurethane insulation helps retain heat. ARISTON also highlights enamelled heating elements, developed to simplify maintenance and support long-term product durability.
Maximum working pressure for the VELIS PRO 50 is 8 bar, maximum operating temperature is 80 °C, and the electrical enclosure rating is IPX4. The water heater is rated energy efficiency class B with an M load profile.
Dimensions are 781 × 511 × 275 mm (height × width × depth). ARISTON's current Slovak technical table lists a dry weight of 21.7 kg. Some other regional ARISTON pages list 23.5 kg for the same code; for the specification below, the 21.7 kg value from the current Central European ARISTON technical table is used.
Main advantages
- ARISTON VELIS PRO 50
- Product code 3626135
- 50 L product category
- Actual water capacity 45 L
- Ultra-slim construction
- Only 275 mm deep
- Vertical or horizontal installation
- Wall-mounted installation
- Twin-tank construction
- Two enamelled-steel tanks
- Two enamelled Incoloy heating elements
- Two magnesium anodes
- Nominal power 1.5 kW
- 230 V supply
- Soft Touch electronic controls
- Intelligent ECO EVO energy-saving function
- Energy savings of up to 15%
- First shower ready in approximately 46 minutes
- Heating time 1 h 34 min at ΔT = 45 °C
- Maximum operating temperature 80 °C
- Maximum working pressure 8 bar
- IPX4 protection
- Polyurethane insulation
- Energy efficiency class B
- Load profile M
- Modern, compact ARISTON design
Technical information
| Parameter | Value |
|---|---|
| Manufacturer | ARISTON |
| Series | VELIS PRO |
| Model | VELIS PRO 50 EU |
| Product code | 3626135 |
| EAN | 5411692100810 |
| Product type | Electric storage water heater |
| Product capacity category | 50 L |
| Actual water capacity | 45 L |
| Installation orientation | Vertical / horizontal |
| Installation | Wall-mounted |
| Number of tanks | 2 |
| Tank construction | Enamelled steel |
| Number of heating elements | 2 |
| Heating elements | Enamelled Incoloy alloy |
| Nominal power | 1.5 kW |
| Power supply | 230 V / 220–240 V |
| Heating time, ΔT = 45 °C | 1 h 34 min |
| Heating time, ΔT = 50 °C | 1 h 44 min |
| First shower ready | 46 min |
| Maximum working pressure | 8 bar |
| Maximum operating temperature | 80 °C |
| Electrical protection rating | IPX4 |
| Controls | Soft Touch electronic |
| ECO EVO | Yes |
| Potential energy saving | up to 15% |
| Corrosion protection | 2 magnesium anodes |
| Insulation | Polyurethane |
| Energy efficiency class | B |
| Load profile | M |
| Height | 781 mm |
| Width | 511 mm |
| Depth | 275 mm |
| Dry weight | 21.7 kg |