ARISTON VELIS PRO 100 V/H 80 l 1.5 kW electric water heater, vertical/horizontal, 3626137

540.00 EUR  445.30 EUR

Datu lapa

- +

Add to cart

ARISTON VELIS PRO 100 V/H Electric Water Heater 80 L, 1.5 kW, Vertical/Horizontal, 3626137

ARISTON VELIS PRO 100 is a flat-design electric storage water heater designed for wall installation in either a vertical or horizontal position. For the exact VELIS PRO 100 EU model, ARISTON's official documentation specifies product code 3626137, EAN 5411692103132, the nominal 100-litre model category and an actual stored-water capacity of 80 litres. Therefore, the 80 L capacity used in your product title is correct.

A major advantage of the VELIS PRO is its exceptionally slim body, measuring only 275 mm deep. This makes the water heater suitable for bathrooms, utility rooms and other locations where a conventional cylindrical storage heater would occupy considerably more space. ARISTON officially specifies universal wall mounting in either a vertical or horizontal position.

VELIS PRO 100 uses a Twin Tank configuration consisting of two interconnected cylindrical enamelled-steel storage tanks. The two-tank design allows the appliance to retain its characteristic flat profile while preparing usable hot water faster than a conventional single-cylinder storage heater.

Both tanks are equipped with enamelled heating elements, while two magnesium anodes provide corrosion protection. ARISTON's official technical specification for the VELIS PRO 100 also identifies an enamelled internal tank coating and polyurethane thermal insulation to help reduce heat loss.

The VELIS PRO 100 has a nominal heating output of 1.5 kW and is designed for a 220–240 V electrical supply. ARISTON lists the two heating elements as a 1.5/1.5 kW configuration. This describes the twin-tank heating arrangement and should not be interpreted as a continuous simultaneous 3 kW input.

The actual stored-water capacity is 80 litres, while ARISTON's Hungarian official technical table specifies a V40 hot-water output of 195 litres for the VELIS PRO 100. V40 represents the amount of usable mixed hot water available at 40 °C after the stored hot water is blended with cold water to a comfortable delivery temperature.

The water heater is equipped with an electronic Soft Touch control panel for selecting the desired water temperature and controlling appliance operation. The specific VELIS PRO 100 EU version with product code 3626137 is not a Wi-Fi model; ARISTON's official specification explicitly lists Wi-Fi as unavailable.

The intelligent ECO EVO function analyses the user's hot-water consumption habits and adapts heating to actual demand. ARISTON states that this function can provide energy savings of up to 15% compared with a conventional electric storage water heater under appropriate operating conditions.

According to ARISTON's official technical specification, full heating time for the VELIS PRO 100 at ΔT = 45 °C is 2 hours 47 minutes. ARISTON's Spanish product page additionally specifies approximately 46 minutes to prepare the first shower. A Hungarian technical table also shows 3 h 06 min under a different table reference; for an online-store specification, 2 h 47 min with ΔT = 45 °C explicitly stated is the clearer value.

Maximum operating temperature is 80 °C, maximum working pressure is 0.8 MPa / 8 bar, and electrical protection is IPX4. ARISTON's official specification also lists a safety valve and power cable as included. The model has energy efficiency class B and an M load profile.

The VELIS PRO 100 EU measures 1256 × 511 × 275 mm (height × width × depth). ARISTON's official Ukrainian specification lists a net weight of 35.5 kg, gross weight of 39.5 kg, and package dimensions of 136 × 57 × 33.5 cm. ARISTON's Spanish regional page lists 32.2 kg for the corresponding product generation; for product code 3626137, the detailed model-specific specification of 35.5 kg is used below.

Main advantages

• ARISTON VELIS PRO 100
• Product code 3626137
• EAN 5411692103132
• 100 L model category
• Actual water capacity 80 L
• V40 hot-water output up to 195 L
• Ultra-slim flat design
• Only 275 mm deep
• Vertical or horizontal wall installation
• Twin Tank construction
• Two enamelled-steel tanks
• Two enamelled heating elements
• Two magnesium anodes
• Polyurethane insulation
• Nominal heating output 1.5 kW
• 220–240 V electrical supply
• Soft Touch electronic controls
• Electronic temperature control
• ECO EVO energy-saving function
• Potential energy savings up to 15%
• First shower ready in approximately 46 minutes
• Full heating time 2 h 47 min at ΔT = 45 °C
• Maximum operating temperature 80 °C
• Maximum working pressure 8 bar
• IPX4 electrical protection
• Energy efficiency class B
• Load profile M
• Safety valve included
• Power cable included
• No Wi-Fi
• Compact modern ARISTON design

Technical information