ECOMIX-C 2000 comprehensive water treatment unit, 1.8 m³/h

Dear customer!

In order to place an order and make sure that the chosen equipment meets your needs, before purchasing, we recommend sending the results of water analysis and consulting with our specialist.

Complex purification plant ECOMIX

Application

Most of the equipment is used to purify water from high amounts of iron, manganese and hardness (water softening), but in addition, the equipment also reduces ammonium and oxidizability (organic substances - which are usually present in surface water).

Operating principle

The tank of the equipment is filled with specific filling, which consists of various ion exchange resins and adsorption materials. This filling is used to purify water from iron, manganese and ammonium compounds, as well as for water softening and oxidizability purification. Water, flowing through this filling in the tank, attracts calcium, magnesium, iron, manganese, ammonium, etc. ions. Thus, the water reaches the consumer purified. However, as the untreated water flows through the tank volume, it gradually reduces the performance of this filling, so it must be renewed periodically. Recovery occurs automatically by rinsing with a saline solution. This is called filter regeneration. Elements accumulated during regeneration (Ca, Mg, etc.) are flushed down the drain. When the rinsing process is over, the device is ready for operation again, for water purification. The device operated in automatic mode with the help of a control mechanism.

The control mechanism is fully equipped with the necessary functions to be able to adjust the settings needed individually for each customer, guided by the results of water analyses, water pressures, etc. The control mechanism is equipped with a water consumption meter, which ensures the regeneration interval of the device (counts liters until the next regeneration), thus ensuring the consumption of the reagent "Salt" and the economy of water.

Water connection - inlet and outlet size

1''- external threads

1''-1/4 outer v.

The size of the sewage connection

3/4 - external thread

Electricity connection

220-240V -12V

Operating temperature (ºC)

+4 - +30ºC

The frequency of regeneration is calculated for each customer individually, which depends on the quality of the purified water (water hardness, content of iron, manganese, ammonium, etc.) and the selected equipment model.

The amount of waste water per regeneration also depends on water quality, pressures, pipe diameters, etc.

Reagent consumption also depends on the quality, density, etc. of the "Salt" reagent itself.

Operation

It is necessary to independently and regularly monitor the replenishment of the reagent in the salt compartment of the device, which depends on the volume of the reagent tank and water consumption. In standard situations, the salt is replenished approximately 2 times a month by covering the full reagent compartment with salt granules. The next addition of reagent should be made when the salt level in the compartment has dropped to approximately ½ of the total volume.

It is recommended to perform equipment maintenance once a year.

Periodically (every 3-7 years) it will be necessary to change the filling of the equipment. The frequency of change depends on the quality of the water to be treated, the flushing efficiency of the equipment and the water consumed

The total warranty of the equipment is 3 years.