Water Heater Fixing Kit 10×100 mm, 2 Hooks + 2 Wall Plugs

The 10×100 mm fixing kit is intended for mounting water heaters and storage heaters to a suitable wall structure. The kit includes the fixing components required to secure the water heater to the wall according to the installation requirements of the specific appliance.

The set contains 2 fixing hooks and 2 wall plugs. The fixing size is 10×100 mm, therefore the water-heater mounting points and suitability of the wall structure should be checked before installation.

The fixing kit can be used for wall-mounted water heaters whose mounting arrangement is designed for hooks of a corresponding size. Correct selection of the fixings is essential for safe and stable appliance installation.

The wall material, total filled weight of the water heater and the manufacturer's installation requirements must be considered during installation. The fixings must only be installed into a sufficiently strong supporting structure.

Before drilling, it is recommended to accurately measure the spacing between the water-heater mounting points and select a drilling method suitable for the wall material. An unsuitable mounting position or insufficiently strong substrate can reduce installation safety.

Before installation, make sure that the 10×100 mm fixing size and the supplied wall plugs are suitable for the particular wall construction and water-heater mounting arrangement.

Technical information