🚚 Delivery Price Calculator
Approximate price estimate · Prices include VAT
1. Select delivery country
Estimated delivery price
—
⚠ Informational estimate only. Actual price may vary depending on item weight, dimensions and courier conditions. The seller reserves the right to issue an additional invoice. Contact us for exact pricing: +371 29287710 · [email protected]
🚚 Delivery Price Calculator
TOP SANTEHNIKA.LV official dealer:
* ESTO only in Estonia, Latvia, Lithuania
IBO OLA 60/60 INOX submersible well pump, 0.8 kW, 230 V
IBO OLA 60/60 INOX is a multistage submersible pump designed for clean water supply from wells, water tanks and reservoirs. It is suitable for domestic water supply, cottages, small farms, garden irrigation and general water transfer.
With a compact 98 mm diameter, the pump is suitable for wells and reservoirs where a powerful yet compact submersible pump is required. The OLA INOX series is equipped with a motor cooling jacket, helping ensure proper motor cooling even in applications with lower water levels. The stainless steel housing provides corrosion resistance and long service life.
The pump is intended for clean water without sand or abrasive particles. It is suitable for household water supply, garden watering and water transfer from wells or storage tanks.
Technical information
| Parameter | Value |
|---|---|
| Manufacturer / brand | IBO |
| Model | OLA 60/60 INOX |
| Type | Multistage submersible well pump |
| Application | Clean water, water supply, irrigation, water transfer |
| Motor power | 0.8 kW / 800 W |
| Power supply | 1~230 V, 50 Hz |
| Rated current | 4.6 A |
| Maximum head | 70–72 m |
| Maximum flow rate | 60 l/min / 3.6 m³/h |
| Maximum pressure | approx. 7 bar |
| Discharge connection | 1" |
| Pump diameter | 98 mm |
| Pump height | approx. 680 mm |
| Weight | approx. 11.5–12 kg |
| Maximum liquid temperature | +35 °C |
| Motor speed | 2850 rpm |
| Protection rating | IP68 |
| Insulation class | B |
| Duty mode | Continuous operation |
| Operating position | Vertical |
| Maximum starts | 20 per hour |
| Maximum immersion depth | up to 80 m |
| Housing | Stainless steel INOX / AISI 304 |
| Shaft | Stainless steel AISI 304 |
| Impeller | Noryl / technopolymer |
| Diffusers | Noryl / technopolymer |
| Mechanical seal | Carbon / SiC |
| Float switch | Depending on version |
| Power cable | Depending on version: 15–20 m |
| Suitable for | Wells, tanks, reservoirs, garden irrigation |