🚚 Delivery Price Calculator
Approximate price estimate · Prices include VAT
1. Select delivery country
Estimated delivery price
—
⚠ Informational estimate only. Actual price may vary depending on item weight, dimensions and courier conditions. The seller reserves the right to issue an additional invoice. Contact us for exact pricing: +371 29287710 · [email protected]
🚚 Delivery Price Calculator
TOP SANTEHNIKA.LV official dealer:
* ESTO only in Estonia, Latvia, Lithuania
IBO RAINER 1200 AUTO submersible pump for clean and slightly contaminated water, 1.2 kW, 230 V
IBO RAINER 1200 AUTO is an automatic submersible pump designed for pumping clean and slightly contaminated water. It is suitable for rainwater use, garden irrigation systems, domestic water supply, rainwater collection systems and pumping clean water from flooded rooms.
The pump is suitable for water without abrasive particles such as sand, as well as for water containing chlorine. It is a practical solution for rainwater tanks, cisterns, wells and other water storage applications where automatic water supply is required.
The RAINER 1200 AUTO model is equipped with an electronic automatic control system instead of a float switch. When the outlet valve or tap is closed, the pump switches off automatically and enters standby mode while maintaining pressure in the system. When the tap or valve is opened, the pump starts automatically.
The pump has a cooling jacket, so it does not need to be fully submerged in water. The unit is equipped with dry-running protection, automatic air venting, leakage protection and motor thermal overload protection.
Technical information
| Parameter | Value |
| Manufacturer | IBO / Dambat |
| Model | RAINER 1200 AUTO |
| Product type | Automatic submersible pump |
| Application | Clean and slightly contaminated water, rainwater, irrigation, water supply, drainage |
| Suitable for chlorinated water | Yes |
| Not suitable for | Water with abrasive particles, such as sand |
| Power supply | 1~230 V |
| Frequency | 50 Hz |
| Motor power | 1.2 kW |
| Current | 5.2 A |
| Maximum flow rate | 95 l/min / 5.7 m³/h |
| Maximum head | 50 m |
| Motor speed | 2850 rpm |
| Protection rating | IPX8 |
| Insulation class | B |
| Operating mode | Continuous duty |
| Particle size | up to 1 mm |
| Connection | 1" |
| Outlet direction | Vertical |
| Working position | Vertical |
| Built-in float / probe | No |
| Control | Electronic automatic control |
| Dry-running protection | Yes |
| Leakage protection | Yes |
| Automatic air venting | Yes |
| Thermal protection | Yes |
| Power cable | 10 m |
| Dimensions | 520 × 150 × 166 mm |
| Weight | 9.2 kg |
| Housing | Stainless steel AISI 304 |
| Impeller | PPO polymer |
| Shaft and motor rotor | Stainless steel AISI 304 |
| Mechanical seal | Ceramic / carbon / NBR |
| Warranty | 24 months |