To confirm the delivery cost before placing your order, please email us at [email protected] .
Up to 10-15 kg per parcel


TOP SANTEHNIKA.LV official dealer:


* ESTO only in Estonia, Latvia, Lithuania
KALVIS K-2-40DG 40kW universal pellet boiler

KALVIS K-2-40DG 40 kW multipurpose pellet and solid fuel boiler
KALVIS K-2-40DG is a Lithuanian-manufactured multipurpose central heating boiler with a nominal heat output of 40 kW, combining automatic wood pellet heating with the possibility of using conventional solid fuels. Its bottom-combustion construction is suitable for heating systems in residential, agricultural, commercial and other buildings requiring relatively high thermal output. After conversion to manual firing in accordance with the manufacturer's instructions, the boiler can operate on wood logs, wood waste and approved briquettes.
In automatic pellet mode, the heating output can be adjusted between 10 and 40 kW to match the demand of the heating system. The manufacturer specifies 89% boiler efficiency and pellet consumption of approximately 9.4 kg/h at nominal output. The required fuel is wood pellets with a diameter of 6–8 mm, delivered from a separate hopper through an auger conveyor and flexible feed hose. When adapted for manual solid fuel operation, the boiler offers a spacious 200-litre combustion chamber, allowing larger quantities of fuel to be loaded.
The boiler incorporates 6 mm thick internal steel walls, secondary air supply, a secondary combustion chamber with a refractory concrete catalyst, turbulators and a fire grate shaking mechanism. The heat exchanger can be cleaned from both sides of the boiler, while solid fuel can be loaded from the front or top during manual operation. Safety provisions include an emergency cooling coil, and the construction allows optional installation of a smoke exhauster or an electric heating element. The manufacturer provides a four-year warranty on the boiler body, subject to applicable warranty conditions.
Depending on the ordered configuration, the KALVIS K-2-40DG is equipped with a BurnPell X 44 or BurnPell EVO 44 pellet burner and an S.Control Touch MK2 or S.Control Standard MK2 controller. Burner functions include automatic ignition, cleaning, combustion monitoring, electronic power adjustment and restarting after a power interruption. The controller supports weekly schedules, heating circuit management and domestic hot water preparation. Optional accessories allow connection of an ecoSTER room thermostat, ecoNET internet module and lambda sensor.
The KALVIS K-2-40DG has an 80-litre water capacity and a Ø 180 mm flue connection. Required draught is 15 Pa in pellet mode and 20–25 Pa when burning wood logs. Overall dimensions with the burner installed are 1360 × 930 × 1600 mm (height × width × depth), excluding the separate pellet hopper and auger conveyor. The boiler and burner weigh approximately 580 kg, with a gross weight of 605 kg. The building's heat losses, available boiler room space, chimney suitability and exact supply configuration should be assessed before purchasing.
Technical information
| General information | |
| Manufacturer | KALVIS, Lithuania |
| Model | K-2-40DG |
| Boiler type | Multipurpose pellet and solid fuel boiler |
| Combustion principle | Bottom combustion / automatic pellet feeding |
| Output, efficiency and fuel | |
| Nominal / minimum heat output | 40 / 10 kW |
| Efficiency in pellet mode | 89% |
| Pellet consumption at nominal output | 9.4 kg/h |
| Fuel in automatic mode | Wood pellets, Ø 6–8 mm |
| Fuel in manual mode | Wood logs, coal, wood waste, sawdust and peat briquettes |
| Combustion chamber capacity in manual mode | 200 l |
| Construction and dimensions | |
| Boiler water volume | 80 l |
| Flue connection | Ø 180 mm |
| Draught in pellet mode | 15 Pa |
| Draught when firing wood logs | 20–25 Pa |
| Dimensions with burner (H × W × D) | 1360 × 930 × 1600 mm |
| Boiler depth without burner (Lk) | 1290 mm |
| Pellet hopper and conveyor | Not included in stated dimensions |
| Weight (with burner / gross) | 580 / 605 kg (±10%) |
| Internal steel wall thickness | 6 mm |
| Boiler body warranty | 4 years |
| Automation and control | |
| Burner options | BurnPell X 44 / BurnPell EVO 44 |
| Controller options | S.Control Touch MK2 / S.Control Standard MK2 |
| Automatic functions | Ignition, cleaning, combustion monitoring, power adjustment |
| Optional control features | ecoSTER, ecoNET, lambda sensor, heating circuit modules |
- Select boiler output according to calculated building heat losses rather than heated floor area alone.
- Installation, chimney connection and condensation protection must be completed by a qualified specialist in accordance with KALVIS instructions.
- Only use manufacturer-approved fuel for manual firing; wood with moisture above 25% is not recommended.
- Confirm the actual burner, controller, pellet hopper and auger conveyor configuration before ordering.

1. Burner door with burner opening
2. Burner
3. Boiler
4. Traction control
5. Boiler control
6. Secondary air intake
7. Ashtray
8. Grids
9. Cast iron fireplace door
10. Flexible reinforced hose
11. Pellet screw conveyor
12. Pellet bunker.
