To confirm the delivery cost before placing your order, please email us at [email protected] .
Up to 10-15 kg per parcel


TOP SANTEHNIKA.LV official dealer:


* ESTO only in Estonia, Latvia, Lithuania
KALVIS K-2-30DG 30kW universal pellet boiler

KALVIS K-2-30DG 30 kW multipurpose pellet and solid fuel boiler, Class 5
KALVIS K-2-30DG is a Lithuanian-manufactured multipurpose automatic pellet heating boiler with a nominal heat output of 31.2 kW, designed for central heating systems in residential, commercial and other buildings. The boiler meets EN 303-5 Class 5 requirements and has an A+ energy efficiency rating. Its bottom-combustion K-2 construction combines automatic pellet feeding with the possibility of adapting the boiler for manual firing using wood logs and other manufacturer-approved solid fuels.
In automatic pellet mode, the heat output can be regulated between 8.6 and 31.2 kW to suit heating system demand. The manufacturer specifies 89% boiler efficiency and 79% seasonal space heating efficiency. Pellet consumption at nominal output is approximately 7 kg/h. The boiler uses wood pellets with a diameter of 6–8 mm, supplied from a separate hopper through an auger conveyor. When adapted for manual solid fuel operation, the combustion chamber has a capacity of 155 litres.
The boiler construction includes 6 mm thick internal steel walls, secondary air supply, a secondary combustion chamber with a refractory concrete catalyst, turbulators and a fire grate shaking mechanism. The heat exchanger can be cleaned from both sides of the boiler, while manually fired fuel can be loaded from the front or top. Additional safety is provided by an emergency cooling coil, and the design permits installation of a smoke exhauster or electric heating element. The manufacturer offers a four-year warranty on the boiler body under the applicable warranty conditions.
Depending on the selected configuration, the KALVIS K-2-30DG is equipped with a BurnPell X Mini 35 or BurnPell EVO Mini 35 pellet burner and an S.Control Touch MK2 or S.Control Standard MK2 controller. Automatic functions include ignition, burner cleaning, combustion monitoring, gradual output regulation and restarting after power interruptions. The controller supports weekly programming, heating circuit and domestic hot water management. Compatible optional accessories include an ecoSTER room thermostat, ecoNET internet module and lambda sensor.
The KALVIS K-2-30DG has a 103-litre water capacity and a Ø 180 mm flue connection. Required draught is 15 Pa in pellet mode and 18–23 Pa when burning wood logs. The boiler measures 1450 × 770 × 1560 mm (height × width × depth) with the burner installed, excluding the pellet hopper and feed conveyor. The boiler and burner weigh approximately 567 kg, with a gross weight of 592 kg. Building heat losses, available boiler room space, chimney compatibility and equipment configuration should be evaluated before purchase.
Technical information
| General information | |
| Manufacturer | KALVIS, Lithuania |
| Model | K-2-30DG |
| Boiler type | Multipurpose pellet and solid fuel boiler |
| Boiler classification | Class 5, EN 303-5 |
| Energy efficiency class | A+ |
| Output, efficiency and fuel | |
| Nominal / minimum heat output | 31.2 / 8.6 kW |
| Efficiency in pellet mode | 89% |
| Seasonal space heating efficiency | 79% |
| Energy efficiency index | 117 |
| Pellet consumption at nominal output | 7 kg/h |
| Fuel in automatic mode | Wood pellets, Ø 6–8 mm |
| Fuel in manual mode | Wood logs, wood waste, approved briquettes and solid fuels |
| Combustion chamber volume in manual mode | 155 l |
| Construction and dimensions | |
| Boiler water volume | 103 l |
| Flue connection | Ø 180 mm |
| Draught in pellet mode | 15 Pa |
| Draught in wood firing mode | 18–23 Pa |
| Dimensions with burner (H × W × D) | 1450 × 770 × 1560 mm |
| Depth without burner (Lk) | 1340 mm |
| Pellet hopper and conveyor | Excluded from stated dimensions |
| Weight (with burner / gross) | 567 / 592 kg (±10%) |
| Internal steel wall thickness | 6 mm |
| Boiler body warranty | 4 years |
| Automation and control | |
| Burner options | BurnPell X Mini 35 / BurnPell EVO Mini 35 |
| Controller options | S.Control Touch MK2 / S.Control Standard MK2 |
| Automatic functions | Ignition, cleaning, combustion control, output adjustment |
| Optional control features | ecoSTER, ecoNET, lambda sensor, heating circuit modules |
- Select the boiler output according to calculated building heat losses rather than heated floor area alone.
- Have installation, chimney connection and condensation protection carried out by a qualified heating specialist.
- Use only manufacturer-approved fuel for manual firing; wood moisture should not exceed 25%.
- Verify the supplied burner, controller, pellet hopper and feeding conveyor configuration before ordering.

1. Burner door with burner opening
2. Burner
3. Boiler
4. Traction control
5. Boiler control
6. Secondary air intake
7. Ashtray
8. Grids
9. Cast iron fireplace door
10. Flexible reinforced hose
11. Pellet screw conveyor
12. Pellet bunker.
