To confirm the delivery cost before placing your order, please email us at [email protected] .
Up to 10-15 kg per parcel


TOP SANTEHNIKA.LV official dealer:


* ESTO only in Estonia, Latvia, Lithuania
KALVIS K-8-16DG 16kW compact pellet boiler, Class 5

KALVIS K-8-16DG 16 kW compact pellet boiler, Class 5
KALVIS K-8-16DG is a Lithuanian-made compact automatic pellet heating boiler with a nominal output of 16 kW, designed for building central heating systems. The boiler meets EN 303-5 Class 5 requirements and combines automatic pellet feeding, electronic combustion management and an integrated fuel hopper. Its compact construction allows installation in a suitable boiler room while maintaining access for refilling and servicing.
The boiler output can be adjusted between 4.8 and 16 kW, allowing heat production to respond to the demand of the heating system. The manufacturer specifies a boiler efficiency of 89% and pellet consumption of approximately 3.8 kg/h at nominal output. It operates on wood pellets with a diameter of 6–8 mm. The integrated 155-litre pellet hopper reduces the frequency of manual fuel refilling, while the boiler contains 70 litres of water.
Depending on the supplied configuration, the KALVIS K-8-16DG is equipped with either a BurnPell X.Mini or PellasX Revo 26 burner. Burner functions include automatic ignition, cleaning, combustion monitoring, electronic power adjustment and automatic restarting after a power interruption. The burner combustion chamber is manufactured from heat-resistant stainless steel. The manufacturer specifies burner combustion efficiency of up to 99%, which is separate from the boiler's overall 89% efficiency.
The boiler can be supplied with an S.Control Touch MK2 or S.Control Standard MK2 controller. The control system supports weekly operating schedules, temperature sensor connections, heating circuit management and domestic hot water control functions. Optional expansion modules allow the management of four additional heating circuits with their actuators. The system also supports connection of an ecoSTER room thermostat, an ecoNET internet module and a lambda sensor when the appropriate accessories are installed.
The KALVIS K-8-16DG measures 1320 × 635 × 1045 mm (height × width × depth) and has a 160 mm flue connection. The manufacturer specifies 20 Pa draught in the boiler combustion chamber and an approximate gross weight of 280 kg. The construction includes turbulators, an ash drawer and a mechanical pellet feeding system with an auger. The building's heat losses, suitability of the chimney and the exact controller configuration should be evaluated before purchase.
Technical information
| General information | |
| Manufacturer | KALVIS, Lithuania |
| Model | K-8-16DG |
| Boiler type | Automatic pellet heating boiler |
| Boiler classification | Class 5, EN 303-5 |
| Fuel | Wood pellets, Ø 6–8 mm |
| Output, efficiency and construction | |
| Nominal heat output | 16 kW |
| Minimum heat output | 4.8 kW |
| Boiler efficiency | 89% |
| Pellet consumption at nominal output | 3.8 kg/h |
| Pellet hopper capacity | 155 l |
| Boiler water volume | 70 l |
| Flue connection | Ø 160 mm |
| Required draught | 20 Pa |
| Dimensions (H × W × D) | 1320 × 635 × 1045 mm |
| Gross weight (±10%) | 280 kg |
| Automation and equipment | |
| Burner options | BurnPell X.Mini / PellasX Revo 26 |
| Controller options | S.Control Touch MK2 / S.Control Standard MK2 |
| Automatic functions | Ignition, combustion control, burner cleaning, power adjustment |
| Pellet feeding | Auger feeder and pellet supply hose |
| Optional control features | ecoSTER, ecoNET, lambda sensor, heating circuit modules |
- Select the boiler output according to calculated building heat losses rather than floor area alone.
- Installation, hydraulic connections and chimney assessment must be performed by a qualified specialist following KALVIS instructions.
- Use wood pellets that meet the manufacturer's requirements and regularly empty the ash drawer.
- Confirm the exact burner and controller configuration and inclusion of optional modules before ordering.

1. Tank
2. Chimney
3. Turbulizers
4. Ash drawer
5. Fuel door with burner opening
6. Burner
7. Flexible reinforced hose
8. Screw pellet conveyor - auger
9. Control panel
Certificate of utility class 5CE declaration of conformity
