To confirm the delivery cost before placing your order, please email us at [email protected] .
Up to 10-15 kg per parcel


TOP SANTEHNIKA.LV official dealer:


* ESTO only in Estonia, Latvia, Lithuania
KOSPEL PPE4.L 27 kW Instantaneous Water Heater, 400 V, Fixed Temperature +52 °C

KOSPEL PPE4.L instantaneous water heater, 27 kW, 400 V, fixed temperature +52 °C
KOSPEL PPE4.L-27 is a powerful electronically controlled three-phase instantaneous water heater designed for domestic hot water preparation in homes and other buildings with a suitable electrical supply. The unit heats water directly as it is used without a storage tank and maintains a fixed water temperature of +52 °C.
The heater features electronic power modulation that automatically adjusts actual heating output according to water flow and incoming water temperature. This helps reduce unnecessary electricity and water consumption. The desired usable water temperature can be obtained by mixing heated water with cold water at the basin, shower or bath mixer.
The model has a rated power of 27 kW, offering a higher hot water output and the possibility of supplying several water outlets. Unlike the lower-power PPE4.L variants, this model does not offer selectable maximum power levels. At a water temperature rise of Δt = 30 °C, the heater delivers 13.0 l/min.
The heater can also reheat previously heated water, provided the incoming water temperature does not exceed +60 °C. The appliance features an IP25 protection rating, G 1/2" water connections and compact housing with approximate dimensions of 478 × 250 × 95 mm. Electronic control operates automatically without a user temperature adjustment panel.
KOSPEL PPE4.L-27 is designed for wall mounting, with a special bracket that simplifies replacement of an existing instantaneous water heater. Operation requires a 400 V three-phase power supply with adequate connection capacity. Electrical wiring, protective devices and water connections must be selected and installed by a qualified professional in accordance with the manufacturer's instructions.
Technical information
| General information | |
| Manufacturer | KOSPEL |
| Series | PPE4.L Lite electronic |
| Product type | Electronic instantaneous water heater |
| Model | PPE4.L-27 |
| Technical specifications and equipment | |
| Rated power | 27 kW |
| Power supply | 400 V, 3~ |
| Rated current | 3 × 39 A |
| Minimum power cable cross-section | 4 × 6 mm² (manufacturer specification) |
| Control system | Electronic power modulation |
| Maintained water temperature | +52 °C (fixed) |
| Temperature adjustment at outlet | By mixing with cold water |
| Output at Δt = 30 °C | 13.0 l/min |
| Permissible water pressure | 0.1–1.0 MPa (1–10 bar) |
| Maximum inlet water temperature | +60 °C |
| Water connections | G 1/2" |
| Protection rating | IP25 |
| Height × width × depth | 478 × 250 × 95 mm |
| Installation | Wall mounted with universal bracket |
| Warranty | 2 years, subject to manufacturer terms |
- Electrical connections must only be carried out by a qualified professional.
- Check the available electrical capacity and required protective devices before installation.
- Disconnect the appliance from the power supply before maintenance or cleaning.
- Follow the manufacturer's installation and operating instructions.
