To confirm the delivery cost before placing your order, please email us at [email protected] .
Up to 10-15 kg per parcel


TOP SANTEHNIKA.LV official dealer:


* ESTO only in Estonia, Latvia, Lithuania
Kospel PPE4.L-10/11/12/15 kW Instantaneous Water Heater, 400 V, Fixed Temperature +52 °C

Kospel PPE4.L-10/11/12/15 instantaneous water heater, 10/11/12/15 kW, 400 V, fixed +52 °C temperature
Kospel PPE4.L-10/11/12/15 is an electronically controlled three-phase electric instantaneous water heater designed to produce domestic hot water on demand without a storage tank. It is suitable for homes, offices and other premises requiring hot water for kitchen sinks, washbasins or showers. Its compact wall-mounted housing makes the heater suitable even for installations with limited available space.
The water heater combines four selectable rated power settings: 10, 11, 12 and 15 kW. The maximum power is configured by a qualified installer according to the building's electrical supply capacity and hot-water requirements. Electronic power modulation continuously adjusts heating output in response to water flow and inlet temperature, helping to use electricity efficiently without constantly operating at maximum power.
The PPE4.L Lite electronic is factory-configured to maintain a constant hot-water temperature of +52 °C. There is no display or external temperature adjustment knob. The user obtains a lower desired water temperature by mixing the heated water with cold water at the tap. The electronic controller maintains the set temperature as long as the available heating output is sufficient for the actual flow rate.
Heating is activated only when hot water is drawn. When a tap is opened and the flow reaches at least 1.8 l/min, the heater starts automatically and switches off once water flow stops. At a temperature increase of Δt = 30 °C, the manufacturer's declared delivery rates are 4.3 / 5.2 / 5.8 / 7.2 l/min at the corresponding 10 / 11 / 12 / 15 kW settings.
The unit may supply several hot-water outlets, including kitchen and bathroom fixtures. The number of outlets that can be used simultaneously depends on the selected power setting, inlet-water temperature and total flow demand. When demand exceeds the selected heating capacity, the delivered water may be cooler than the target temperature. The unit can also reheat previously heated water supplied at a temperature of up to +60 °C.
The PPE4 housing is designed to make replacing an existing water heater easier. Its specially designed mounting bracket supports installation in a variety of existing mounting locations. The unit is equipped with G 1/2" water connections, operates at a supply-water pressure of 0.1–1.0 MPa and has an IP25 enclosure protection rating. The white casing is compact and designed for vertical wall mounting.
This water heater requires a 400 V three-phase electrical supply. Rated current at the four power settings is 3 × 14.5 / 15.9 / 17.3 / 21.7 A, respectively. The manufacturer lists a minimum connection conductor cross-section of 4 × 2.5 mm². The electrical installation, protective devices and power configuration must be verified by a qualified professional in accordance with the installation instructions. Kospel PPE4.L provides convenient hot water without a storage tank and with automatic output control.
Technical information
| General information | |
| Manufacturer | Kospel |
| Model | PPE4.L-10/11/12/15 |
| Series | PPE4.L Lite electronic |
| Appliance type | Electric instantaneous water heater |
| Control | Electronic, automatic power modulation |
| Colour | White |
| Installation | Vertical wall mounting |
| Power and hot-water production | |
| Selectable rated power | 10 / 11 / 12 / 15 kW |
| Temperature setting | Fixed +52 °C |
| User temperature adjustment | Mixing cold water at the tap |
| Display / adjustment knob | None / none |
| Minimum activation flow | 1.8 l/min |
| Flow at 10 kW (Δt = 30 °C) | 4.3 l/min |
| Flow at 11 kW (Δt = 30 °C) | 5.2 l/min |
| Flow at 12 kW (Δt = 30 °C) | 5.8 l/min |
| Flow at 15 kW (Δt = 30 °C) | 7.2 l/min |
| Preheated water inlet | Up to +60 °C |
| Hydraulic parameters | |
| Permissible water pressure | 0.1–1.0 MPa / 1–10 bar |
| Cold-water inlet | G 1/2" |
| Hot-water outlet | G 1/2" |
| Connection centre spacing | Approximately 100 mm |
| Storage tank | None |
| Electrical data | |
| Power supply | 400 V / 3~ |
| Rated current at 10 kW | 3 × 14.5 A |
| Rated current at 11 kW | 3 × 15.9 A |
| Rated current at 12 kW | 3 × 17.3 A |
| Rated current at 15 kW | 3 × 21.7 A |
| Minimum conductor cross-section | 4 × 2.5 mm² (manufacturer's table) |
| Energy efficiency class | A |
| Dimensions, protection and features | |
| Dimensions (H × W × D) | 478 × 250 × 99 mm |
| Weight | Approximately 3.8 kg |
| Protection rating | IP25 |
| Automatic start / stop | Yes, flow activated |
| Electronic temperature maintenance | Yes, +52 °C |
| Installer-selectable power levels | Yes, 4 settings |
| Multiple water outlets | Yes, subject to power and demand |
| Special installation bracket | Yes |
