To confirm the delivery cost before placing your order, please email us at [email protected] .
Up to 10-15 kg per parcel


TOP SANTEHNIKA.LV official dealer:


* ESTO only in Estonia, Latvia, Lithuania
Danfoss TWA-A thermal actuator 230 V AC, NC, RA connection, 088H3112

Danfoss TWA-A Thermoelectric Actuator 230 V AC, NC, RA, 088H3112
Danfoss TWA-A 088H3112 is a thermoelectric actuator for automatic ON/OFF control of valves in heating and cooling systems. The TWA range is designed for electrical control of valves and underfloor-heating manifolds, providing simple and quiet system operation.
This model operates on 230 V AC, 50–60 Hz and is supplied in an NC – Normally Closed configuration. This means that without supply voltage the valve remains closed, while applying voltage activates the actuator and operates the valve.
The TWA-A version features a Danfoss RA connection. In the current Danfoss combination table, TWA-A is specified for RA-N, RA-C, RA-FN and RA-G valves as well as Danfoss SSM underfloor-heating manifolds.
The actuator closing force is 110 N, while the complete spindle travel time is approximately 3 minutes. Control is possible with a conventional ON/OFF signal as well as PWM control. A visual valve position indicator is integrated into the housing.
Operating power consumption is 2 W, while the maximum inrush current for the 230 V version is <250 mA. The enclosure rating is IP41, electrical protection class is II, and the factory-fitted cable is 950 mm long.
The permissible ambient temperature is +2…+60 °C, while the storage and transportation temperature is −40…+70 °C. Danfoss NC versions use a red mounting split on the position indicator, which must be removed after installation for correct actuator operation.
Technical information
| Basic information | |
| Manufacturer | Danfoss |
| Article number | 088H3112 |
| Series / type | TWA-A |
| Product type | Thermoelectric actuator |
| Valve function | NC – Normally Closed |
| Electrical data | |
| Supply voltage | 230 V AC, ±15% |
| Frequency | 50–60 Hz |
| Power consumption | 2 W |
| Max. inrush current | <250 mA |
| Control input | ON/OFF and PWM |
| End switch | No |
| Connection and operation | |
| Valve connection | Danfoss RA |
| Compatibility | RA-N, RA-C, RA-FN, RA-G, SSM |
| Closing force | 110 N |
| Spindle travel time | ≈ 3 min. |
| Position indicator | Yes |
| Protection and construction | |
| Enclosure rating | IP41 |
| Electrical protection class | II |
| Cable length | 950 mm |
| Net weight | 0.118 kg |
| EAN | 5702420049540 |
| Operating conditions | |
| Ambient temperature | +2…+60 °C |
| Storage / transportation temperature | −40…+70 °C |
