
🚚 Delivery Price Calculator
Approximate price estimate · Prices include VAT
1. Select delivery country
2. Select item type
Estimated delivery price
—
⚠ Informational estimate only. Actual price may vary depending on item weight, dimensions and courier conditions. The seller reserves the right to issue an additional invoice. Contact us for exact pricing: +371 29287710 · [email protected]
📞 For exact pricing call: +371 29287710 or email [email protected]
🚚 Delivery Price Calculator
TOP SANTEHNIKA.LV official dealer:


* ESTO only in Estonia, Latvia, Lithuania
VAREM MAXIVAREM LR vertical expansion vessel for heating systems 200 l, 1 1/2", 6 bar

VAREM MAXIVAREM LR 200 L is a vertical diaphragm expansion vessel designed for closed water-based heating systems. It compensates for the increase in heating-water volume caused by thermal expansion and helps maintain stable system pressure. The 200-litre capacity makes it suitable for larger residential and commercial heating systems, boiler installations and heat-pump circuits where this expansion volume is required by system calculations.
MAXIVAREM LR vessels from 50 litres are equipped with a replaceable membrane and screwed flange. This allows the membrane to be replaced when necessary without replacing the complete vessel. The 200 L model has a vertical construction with support feet for floor installation.
Model UR200471CS000000 has a nominal capacity of 200 litres, maximum working pressure of 6 bar, factory pre-charge pressure of 1.5 bar and a 1 1/2" system connection. The vessel measures 554 mm in diameter and 988 mm in height, with a packaging volume of 0.324 m³.
VAREM specifies a top system connection for MAXIVAREM LR vessels from 35 to 700 litres. Models up to 400 litres, including the 200 L version, use a galvanised-steel counterflange. The vessel is finished in red.
The permissible operating-temperature range with water is -10 to +99 °C. Water mixed with ethylene or propylene glycol is not the primary recommended application for MAXIVAREM LR. If glycol is used, the maximum permitted concentration is 20% and the maximum fluid temperature is +70 °C. MAXIVAREM LR is not suitable for potable water.
For the 200 L version, VAREM lists replacement membrane MB0150S4H00000000, galvanised counterflange SPCFL152ZN400000 and pre-charge valve ACVAL200PR000000.
With a capacity of 200 L and PS of 6 bar, PS × V = 1200 bar·L. Under VAREM's PED classification, vessels with PS × V above 1000 and up to 3000 belong to PED Category III and are subject to CE marking under Pressure Equipment Directive 2014/68/EU.
Technical information
| Parameter | Value |
|---|---|
| Manufacturer | VAREM |
| Series | MAXIVAREM LR |
| Product code | UR200471CS000000 |
| Product type | Vertical diaphragm expansion vessel |
| Application | Closed heating systems |
| Capacity | 200 L |
| Maximum working pressure PS | 6 bar |
| PS × V | 1200 bar·L |
| Factory pre-charge pressure | 1.5 bar |
| Connection | 1 1/2" |
| Connection position | Top |
| Operating temperature with water | -10…+99 °C |
| Membrane | Replaceable |
| Replacement membrane code | MB0150S4H00000000 |
| Flange type | Screwed / removable |
| Counterflange code | SPCFL152ZN400000 |
| Counterflange material | Galvanised steel |
| Pre-charge valve code | ACVAL200PR000000 |
| Construction | Vertical |
| Support feet | Yes |
| Diameter | 554 mm |
| Height | 988 mm |
| Dimensions | 554 × 988 mm |
| Colour | Red |
| Glycol use | Limited |
| Maximum glycol concentration | 20% |
| Maximum temperature with glycol | +70 °C |
| Ethylene glycol | Up to 20% |
| Propylene glycol | Up to 20% |
| Suitable for potable water | No |
| Suitable for heating water | Yes |
| CE / PED | Yes |
| PED category | III |
| PED Directive | 2014/68/EU |
| Packaging volume | 0.324 m³ |