To confirm the delivery cost before placing your order, please email us at [email protected] .
Up to 10-15 kg per parcel


TOP SANTEHNIKA.LV official dealer:


* ESTO only in Estonia, Latvia, Lithuania
KALVIS K-5-12(10) 10-12kW solid fuel boiler

KALVIS K-5-12(10) 10–12 kW compact solid fuel heating boiler
KALVIS K-5-12(10) is a Lithuanian-manufactured compact solid fuel central heating boiler with a heat output of 10–12 kW, designed for heating systems in residential houses, holiday homes and other smaller buildings. The boiler operates according to the volumetric combustion principle and uses manual fuel loading. Its relatively small external dimensions allow installation in boiler rooms where the available floor space is limited.
This model allows its heat output to be changed by using a heat exchanger turbulator. With the turbulator installed, the boiler delivers 12 kW, while without it the nominal output is 10 kW. The manufacturer specifies a 76% efficiency when burning wood logs. The indicated heated area is approximately 86–252 m² for B-class buildings and 46–132 m² for C-class buildings, although the appropriate boiler output should always be selected according to the calculated heat losses of the particular building.
The main fuel is wood logs up to 30 cm long. The manufacturer also permits hard coal, pieces of wood waste, sawdust briquettes and peat briquettes. The boiler has a 32-litre combustion chamber that allows convenient manual loading. Under favourable conditions, one fuel charge may burn for up to 6 hours. Actual burning time depends on the fuel type, its moisture content, outdoor temperature and the load on the heating system.
The internal steel walls of the boiler body are 5 mm thick. Its construction includes a heat exchanger turbulator, flue draught damper, smoke damper, fire grates, ash drawer and mechanical draught regulator. Boiler temperature is automatically controlled by the draught regulator, while the uncomplicated construction makes ash removal and routine cleaning convenient. The manufacturer offers a four-year warranty on the boiler body, subject to the specified installation and operating conditions.
The KALVIS K-5-12(10) has a 24-litre water capacity and a Ø 130 mm flue connection. The manufacturer's specified minimum chimney draught is 11 Pa. Overall dimensions are 1010 × 470 × 620 mm (height × width × depth), and the approximate gross weight is 166 kg. During installation, an appropriate chimney, heating system safety devices and return temperature protection must be provided to prevent condensation and support long-term reliable operation.
Technical information
| General information | |
| Manufacturer | KALVIS, Lithuania |
| Model | K-5-12(10) |
| Boiler type | Solid fuel central heating boiler |
| Combustion principle | Volumetric combustion, manual firing |
| Output and fuel | |
| Output with / without turbulator | 12 / 10 kW |
| Efficiency when burning wood logs | 76% |
| Primary fuel | Wood logs |
| Other permitted fuels | Hard coal, wood waste, sawdust and peat briquettes |
| Combustion chamber capacity | 32 l |
| Burning duration per fuel charge | Up to 6 hours |
| Maximum log length | 30 cm |
| Heated area, B / C class buildings | 86–252 / 46–132 m² (indicative) |
| Construction and dimensions | |
| Boiler water volume | 24 l |
| Flue connection | Ø 130 mm |
| Minimum chimney draught | 11 Pa |
| Dimensions (H × W × D) | 1010 × 470 × 620 mm |
| Gross weight (±10%) | 166 kg |
| Internal steel wall thickness | 5 mm |
| Temperature regulation | Automatic via mechanical draught regulator |
| Boiler equipment | Turbulator, dampers, fire grates, ash drawer |
| Boiler body warranty | 4 years |
- Select boiler output according to the building's calculated heat losses rather than its floor area alone.
- Have installation and chimney connection carried out by a qualified specialist following the manufacturer's anti-condensation recommendations.
- Use dry logs no longer than 30 cm; wood with a moisture content above 25% is not recommended.
- Regularly clean the heat exchanger, turbulator, fire grates and ash drawer according to the operating instructions.

1. Heat exchanger turbulizer.
2. Chimney with flue damper.
3. Grilles.
4. Ash drawer.
5. Smoke screen.
6. Traction regulator.
