To confirm the delivery cost before placing your order, please email us at [email protected] .
Up to 10-15 kg per parcel


TOP SANTEHNIKA.LV official dealer:


* ESTO only in Estonia, Latvia, Lithuania
KALVIS K-2-40 40kW solid fuel boiler
KALVIS K-2-40 40 kW solid fuel central heating boiler
KALVIS K-2-40 is a Lithuanian-manufactured multipurpose 40 kW bottom-combustion solid fuel boiler suitable for central heating systems in larger private houses, agricultural buildings, commercial properties and other premises. The boiler is designed for manual firing with wood logs and other solid fuels approved by the manufacturer. Its construction combines a large fuel loading chamber, a durable steel heat exchanger and mechanical combustion control. It can also be adapted for the optional installation of a pellet burner if the heating system is upgraded for automatic operation in the future.
The boiler has a nominal heat output of 40 kW, while the manufacturer specifies 82% efficiency when burning wood logs. KALVIS provides indicative heating areas of 344–840 m² for B-class buildings and 184–440 m² for C-class buildings. These figures are for reference only and do not represent guaranteed heating coverage because suitability depends on building insulation, ventilation, heating system operating temperatures and calculated heat losses. A building heat-load calculation is recommended before purchasing the boiler.
The KALVIS K-2-40 is equipped with a spacious 200-litre combustion chamber suitable for wood logs up to 45 cm long. Fuel can be loaded from either the front or the top, making manual operation more convenient. In addition to wood logs, the manufacturer permits hard coal, pieces of wood waste, sawdust briquettes and peat briquettes. A single fuel load may provide a combustion duration of up to 10–14 hours under suitable conditions. Actual burning time depends on fuel quality and moisture content, chimney draught, outdoor temperature and the building's heating demand.
The boiler body is manufactured with 6 mm thick internal steel walls. Its construction incorporates secondary air supply and a secondary combustion chamber with a refractory concrete catalyst to support more complete combustion. Equipment includes smoke removal, ignition and draught dampers, a mechanical draught regulator and a fire grate shaking mechanism that facilitates ash removal. The heat exchanger can be cleaned from both sides of the boiler. An emergency cooling coil provides additional safety, while a smoke exhauster or pellet burner can be installed as optional equipment.
The KALVIS K-2-40 has an 80-litre water capacity, a Ø 180 mm flue connection and a minimum required chimney draught of 20 Pa. Its overall dimensions are 1360 × 930 × 1290 mm (height × width × depth), with an approximate gross weight of 570 kg. The manufacturer offers a four-year warranty on the boiler body under its warranty conditions. Reliable operation requires a suitable chimney, appropriate heating system safety equipment and return-water temperature protection against condensation.
Technical information
| General information | |
| Manufacturer | KALVIS, Lithuania |
| Model | K-2-40 |
| Boiler type | Multipurpose solid fuel central heating boiler |
| Combustion principle | Bottom combustion, manual firing |
| Output and fuel | |
| Nominal heat output | 40 kW |
| Efficiency when burning wood logs | 82% |
| Primary fuel | Wood logs |
| Other permitted fuels | Hard coal, wood waste, sawdust and peat briquettes |
| Combustion chamber capacity | 200 l |
| Burning duration per fuel load | Up to 10–14 hours |
| Maximum wood log length | 45 cm |
| Heated area, B / C-class buildings | 344–840 / 184–440 m² (indicative) |
| Construction and dimensions | |
| Boiler water capacity | 80 l |
| Flue connection | Ø 180 mm |
| Minimum chimney draught | 20 Pa |
| Dimensions (H × W × D) | 1360 × 930 × 1290 mm |
| Gross weight (±10%) | 570 kg |
| Internal steel wall thickness | 6 mm |
| Temperature regulation | Automatic via mechanical draught regulator |
| Boiler equipment | Secondary air supply, cooling coil, dampers, fire grate shaker, ash drawer |
| Optional equipment | Pellet burner or smoke exhauster installation |
| Boiler body warranty | 4 years |
- Select boiler output according to calculated building heat losses rather than heated floor area alone.
- Have installation, chimney connection and the required safety equipment completed by a qualified heating specialist.
- Use dry wood logs up to 45 cm long; the manufacturer does not recommend firewood with moisture content above 25%.
- Regularly clean the heat exchanger, fire grates and ash drawer, and maintain protection against condensation.
