To confirm the delivery cost before placing your order, please email us at [email protected] .
Up to 10-15 kg per parcel


TOP SANTEHNIKA.LV official dealer:


* ESTO only in Estonia, Latvia, Lithuania
KALVIS K-2-30 30kW solid fuel boiler
KALVIS K-2-30 30 kW solid fuel central heating boiler
KALVIS K-2-30 is a Lithuanian-manufactured multipurpose 30 kW bottom-combustion solid fuel boiler designed for central heating systems in private houses, agricultural buildings, commercial properties and other premises. It combines a spacious fuel chamber, durable steel construction and mechanical combustion regulation. The boiler is designed for manual firing with wood logs and other approved solid fuels. Its construction also allows the optional installation of a pellet burner for future conversion to automated heating.
The nominal heat output is 30 kW, and the manufacturer specifies 82% efficiency when burning wood logs. KALVIS gives indicative heating areas of 275–672 m² for B-class buildings and 147–352 m² for C-class buildings. These figures are guidance only, since the most suitable boiler output depends on the building's insulation, ventilation, heating system operating temperature and calculated heat losses. A heat-load calculation is recommended before purchase.
The KALVIS K-2-30 is equipped with a large 155-litre combustion chamber that accommodates wood logs up to 40 cm long. Fuel can conveniently be loaded from either the front or the top of the boiler. In addition to wood logs, the manufacturer allows hard coal, pieces of wood waste, sawdust briquettes and peat briquettes. Under suitable operating conditions, a single fuel load can burn for up to 10–14 hours. The actual duration depends on fuel type and moisture content, chimney draught, outdoor temperature and the heating demand of the building.
The boiler body features 6 mm thick internal steel walls. Its construction incorporates secondary air supply and a secondary combustion chamber with a refractory concrete catalyst to improve fuel combustion. Equipment includes smoke removal, ignition and draught dampers, a fire grate shaking mechanism, an ash drawer and a mechanical draught regulator. The heat exchanger can be cleaned from both sides of the boiler. An emergency cooling coil provides additional protection, while a smoke exhauster or pellet burner can be fitted as optional equipment.
The KALVIS K-2-30 has a 103-litre water capacity, a Ø 180 mm flue connection and a minimum required chimney draught of 18 Pa. Its overall dimensions are 1450 × 770 × 1340 mm (height × width × depth), and its approximate gross weight is 552 kg. The manufacturer provides a four-year warranty on the boiler body, subject to warranty conditions. Installation should include a suitable chimney, heating system safety equipment and proper return temperature protection to prevent condensation.
Technical information
| General information | |
| Manufacturer | KALVIS, Lithuania |
| Model | K-2-30 |
| Boiler type | Multipurpose solid fuel central heating boiler |
| Combustion principle | Bottom combustion, manual firing |
| Output and fuel | |
| Nominal heat output | 30 kW |
| Efficiency when burning wood logs | 82% |
| Primary fuel | Wood logs |
| Other permitted fuels | Hard coal, wood waste, sawdust and peat briquettes |
| Combustion chamber volume | 155 l |
| Burning time per fuel load | Up to 10–14 hours |
| Maximum wood log length | 40 cm |
| Heated area, B / C-class buildings | 275–672 / 147–352 m² (indicative) |
| Construction and dimensions | |
| Boiler water capacity | 103 l |
| Flue connection | Ø 180 mm |
| Minimum chimney draught | 18 Pa |
| Dimensions (H × W × D) | 1450 × 770 × 1340 mm |
| Gross weight (±10%) | 552 kg |
| Internal steel wall thickness | 6 mm |
| Temperature regulation | Automatic via mechanical draught regulator |
| Boiler equipment | Secondary air supply, cooling coil, dampers, fire grate shaker, ash drawer |
| Optional equipment | Pellet burner or smoke exhauster installation |
| Boiler body warranty | 4 years |
- Select boiler output according to the building's calculated heat losses rather than heated floor area alone.
- Have installation, chimney connection and safety system arrangements carried out by a qualified heating specialist.
- Use dry wood logs up to 40 cm long; the manufacturer does not recommend wood with moisture content exceeding 25%.
- Regularly clean the heat exchanger, fire grates and ash drawer, and provide adequate protection against condensation.
