To confirm the delivery cost before placing your order, please email us at [email protected] .
Up to 10-15 kg per parcel


TOP SANTEHNIKA.LV official dealer:


* ESTO only in Estonia, Latvia, Lithuania
KALVIS K-2-16 16kW solid fuel boiler

KALVIS K-2-16 N 16 kW solid fuel central heating boiler
KALVIS K-2-16 N is a Lithuanian-manufactured multipurpose 16 kW bottom-combustion solid fuel boiler designed for central heating systems in residential houses, utility buildings and other properties. Its construction combines a spacious fuel chamber, efficient heat exchanger and mechanical combustion regulation. The boiler is intended for manual firing, although the manufacturer also provides the possibility of installing a pellet burner as an additional conversion, allowing future modernisation of the heating system.
The boiler has a nominal heat output of 16 kW, while the manufacturer specifies 82% efficiency when burning wood logs. The indicative heated area is 138–336 m² for B-class buildings and 74–176 m² for C-class buildings. These ranges are informative and do not represent guaranteed coverage because the appropriate boiler output depends on building insulation, ventilation, heating system operating temperatures and calculated heat losses.
The primary fuel is wood logs up to 35 cm long. The manufacturer also permits pieces of wood waste, sawdust briquettes and peat briquettes. The boiler is equipped with a 72-litre combustion chamber that allows fuel to be loaded from either the front or the top. Under suitable operating conditions, a single fuel load can burn for up to 10–14 hours. Actual burning duration depends on the amount and moisture content of fuel, outdoor temperature, chimney draught and the building's heating demand.
The boiler incorporates 6 mm thick internal steel walls, secondary air supply and a secondary combustion chamber with a refractory concrete catalyst. Its equipment includes smoke exhaust, ignition and draught dampers, together with a fire grate shaking mechanism that makes ash removal easier. The heat exchanger can be cleaned from both sides of the boiler. Additional safety is provided by an emergency cooling coil, and the design allows optional installation of a smoke exhauster. A mechanical draught regulator helps maintain the required boiler temperature.
The KALVIS K-2-16 N has a 46-litre water capacity, a Ø 160 mm flue connection and a minimum required chimney draught of 18 Pa. Overall dimensions are 1165 × 670 × 1180 mm (height × width × depth), with an approximate gross weight of 325 kg. The manufacturer provides a four-year warranty on the boiler body, subject to its warranty conditions. Installation must include an appropriate chimney, heating system safety equipment and protection against condensation inside the boiler.
Technical information
| General information | |
| Manufacturer | KALVIS, Lithuania |
| Model | K-2-16 N (manufacturer designation K-2-16) |
| Boiler type | Multipurpose solid fuel central heating boiler |
| Combustion principle | Bottom combustion, manual firing |
| Output and fuel | |
| Nominal heat output | 16 kW |
| Efficiency when burning wood | 82% |
| Primary fuel | Wood logs |
| Additional fuels | Wood waste, sawdust and peat briquettes |
| Combustion chamber volume | 72 l |
| Burning duration per fuel load | Up to 10–14 hours |
| Maximum wood log length | 35 cm |
| Heated area, B / C class | 138–336 / 74–176 m² (indicative) |
| Construction and dimensions | |
| Boiler water volume | 46 l |
| Flue connection | Ø 160 mm |
| Minimum chimney draught | 18 Pa |
| Dimensions (H × W × D) | 1165 × 670 × 1180 mm |
| Gross weight (±10%) | 325 kg |
| Internal steel wall thickness | 6 mm |
| Temperature regulation | Automatic, mechanical draught regulator |
| Boiler equipment | Secondary air supply, cooling coil, dampers, grate shaker, ash drawer |
| Optional installations | Pellet burner and smoke exhauster (not confirmed as standard equipment) |
| Boiler body warranty | 4 years |
- Select boiler output according to calculated building heat losses rather than heated floor area alone.
- Have the boiler, chimney and necessary safety equipment installed by a qualified heating specialist.
- Use dry wood logs up to 35 cm long; the manufacturer advises against wood moisture above 25%.
- Regularly clean the heat exchanger, fire grates and ash drawer, and maintain adequate condensation protection.

1. Room el. heating elements
2. Cooling coil
3. Smoke shut-off valve
4. Start valve
5. Flue and flue damper
6. Installation location of the smoke exhaust
7. Secondary air intake
8. Soot cleaning caps
9. Combustion chamber bricks
10. Ash drawer
11. Grid shaking mechanism
12. Grid
13. Traction control
