To confirm the delivery cost before placing your order, please email us at [email protected] .
Up to 10-15 kg per parcel


TOP SANTEHNIKA.LV official dealer:


* ESTO only in Estonia, Latvia, Lithuania
KALVIS K-2-12 12kW solid fuel boiler

KALVIS K-2-12 N 12 kW solid fuel central heating boiler
KALVIS K-2-12 N is a Lithuanian-manufactured 12 kW bottom-combustion solid fuel central heating boiler designed for residential houses, utility buildings and other smaller properties. Its construction combines compact external dimensions, a spacious fuel chamber and mechanical combustion regulation. The boiler is suitable for users seeking reliable wood-fired central heating without an automatic pellet feeding system.
The nominal heat output is 12 kW, while the manufacturer specifies 82% efficiency when burning wood logs. KALVIS provides indicative heating areas of 103–252 m² for B-class buildings and 55–132 m² for C-class buildings. These figures are informative rather than guaranteed because suitability depends on the building's actual heat losses, insulation, heating system temperatures and outdoor climatic conditions.
The boiler has a spacious 42-litre combustion chamber suitable for wood logs up to 30 cm long. The manufacturer also permits pieces of wood waste, sawdust briquettes and peat briquettes. Under suitable conditions, a single fuel load can provide a burning duration of up to 8 hours. Actual burning time depends on fuel quantity, moisture content, heating demand and chimney draught, so the maximum duration cannot be guaranteed in every operating situation.
The construction features 6 mm thick internal steel walls, a heat exchanger turbulator, secondary air inlet, ignition and smoke dampers, refractory combustion chamber bricks and an ash drawer. A movable fire grate with a shaking mechanism helps remove ash from the combustion area. The heat exchanger can be cleaned from both sides of the boiler. Additional protection is provided by a cooling coil, while boiler temperature is automatically controlled through a mechanical draught regulation system.
The KALVIS K-2-12 N has a 28-litre water capacity, a Ø 160 mm flue connection and a minimum required chimney draught of 12 Pa. Overall dimensions are 880 × 630 × 970 mm (height × width × depth), with an approximate gross weight of 222 kg. The manufacturer provides a four-year warranty on the boiler body under its warranty conditions. Proper installation requires suitable safety equipment, an appropriate chimney and protection against condensation.
Technical information
| General information | |
| Manufacturer | KALVIS, Lithuania |
| Model | K-2-12 N (K-2-12) |
| Boiler type | Solid fuel central heating boiler |
| Combustion principle | Bottom combustion, manual firing |
| Output and fuel | |
| Nominal heat output | 12 kW |
| Efficiency with wood logs | 82% |
| Primary fuel | Wood logs |
| Other permitted fuels | Wood waste, sawdust and peat briquettes |
| Combustion chamber capacity | 42 l |
| Burning time per fuel load | Up to 8 hours |
| Maximum wood log length | 30 cm |
| Heated area, B / C class buildings | 103–252 / 55–132 m² (indicative) |
| Construction and dimensions | |
| Boiler water capacity | 28 l |
| Flue connection | Ø 160 mm |
| Minimum chimney draught | 12 Pa |
| Dimensions (H × W × D) | 880 × 630 × 970 mm |
| Gross weight (±10%) | 222 kg |
| Internal steel wall thickness | 6 mm |
| Temperature regulation | Automatic via mechanical draught control |
| Boiler equipment | Turbulator, cooling coil, dampers, fire grate, shaking mechanism, ash drawer |
| Boiler body warranty | 4 years |
- Select boiler output according to calculated building heat losses rather than floor area alone.
- Have the boiler, chimney and heating system safety devices installed by a qualified heating specialist.
- Use dry wood logs up to 30 cm long; wood with a moisture content above 25% is not recommended.
- Regularly clean the heat exchanger, fire grate and ash drawer and provide adequate condensation protection.

