PROTHERM Panther Condens 30 KKO-CS/1 single-function condensing gas boiler, 0010025161

PROTHERM Panther Condens 30 KKO-CS/1, 0010025161 is a wall-mounted single-function condensing gas boiler designed for central heating and operation with an external indirect domestic hot-water cylinder.

Adaptive FlameFit / Sitherm Pro combustion control continuously optimises the gas-to-air ratio according to actual gas quality, helping maintain efficient and stable combustion.

With G20 natural gas, useful heating output is 3.9–32.8 kW at 50/30 °C and 3.4–29.8 kW at 80/60 °C. Nominal heating input is 30.6 kW.

The KKO version does not produce instantaneous domestic hot water. An external indirect DHW cylinder can be connected, with useful cylinder-charging output reaching 34.8 kW.

The boiler features a stainless-steel condensing heat exchanger, high-efficiency circulation pump, water-pressure sensor and integrated 8-litre expansion vessel.

Heating flow temperature can be adjusted between 15 and 80 °C. Maximum flow temperature is 85 °C and maximum heating-system operating pressure is 3 bar.

Nominal heating-water flow at ΔT 20 K is 1283 l/h. Available pump head at nominal flow is approximately 120 mbar, while approximate condensate production is 3.4 l/h.

External DHW-cylinder temperature can be set between 45 and 60 °C. The boiler supports eBUS and LIN-bus communication.

G20 natural-gas supply pressure is 20 mbar. Maximum gas consumption is 3.2 m³/h in heating mode and 3.7 m³/h during DHW-cylinder charging.

The boiler has NOx Class 6, weighted G20 NOx emissions of 29.4 mg/kWh, an A space-heating energy class and a sound power level of 52 dB(A).

Electrical supply is 230 V / 50 Hz. Electrical input is 82 W in heating mode, 94 W during cylinder charging, maximum input is 105 W and standby consumption is 2 W.

Dimensions are 740 × 418 × 344 mm and net weight is 32.6 kg.

Key advantages

• Single-function condensing boiler.
• Product code 0010025161.
• 3.9–32.8 kW at 50/30 °C.
• 3.4–29.8 kW at 80/60 °C.
• Up to 34.8 kW for DHW-cylinder charging.
• FlameFit / Sitherm Pro combustion control.
• Stainless-steel heat exchanger.
• High-efficiency circulation pump.
• Integrated 8 l expansion vessel.
• eBUS / LIN-bus communication.
• Energy class A.
• NOx Class 6.
• 52 dB(A) sound power.

Technical information