MIDEA HUGGE 16kW air-to-water heat pump with 240L hot water tank MHA-V16WD2RN8-E / HBT-A160/240CDS90GN8-E

8125.15 EUR  5850.00 EUR

Datu lapa

- +

Add to cart

Midea M thermal HYGGE is an air-to-water heat pump system designed for heating, cooling and domestic hot-water production. This combination consists of the MHA-V16WD2RN8-E outdoor unit and the HBT-A160/240CDS90GN8-E indoor unit with an integrated 240-litre tank.

The HYGGE range is designed to maintain high heating performance at low outdoor temperatures. According to the brochure, 100% heating capacity is maintained at A-15/W35, while a leaving-water temperature of up to 45 °C is available even at an outdoor temperature of -28 °C.

The MHA-V16WD2RN8-E has a nominal heating capacity of 15.50 kW and a COP of 4.61 at A7/W35. SCOP at W35 is 4.93 for an average climate and 4.55 for a cold climate. Energy efficiency class at W35/W55 is A+++/A+++.

The system uses R32 refrigerant, an EVI DC Twin Rotary compressor and an EEV electronic expansion valve. The heating operating range is -28 to +35 °C, while the domestic hot-water operating range is -28 to +43 °C.

Noise-reduction features include a Dragonfly bionic fan-blade design, high sound-insulation material, a fully modular two-stage vibration-isolation structure and a low-frequency response pipe. For the HYGGE 12–16 kW series, Midea specifies sound pressure of up to 46 dB(A).

The HBT-A160/240CDS90GN8-E indoor unit incorporates a 240 l hot-water tank and a 9 kW three-phase auxiliary electric heater. The hydraulic system shown in the brochure also includes an air vent valve, water flow switch, plate heat exchanger, circulation pump, expansion vessel and pressure relief valve.

Technical information – outdoor unit MHA-V16WD2RN8-E

Manufacturer: Midea

Series: M thermal HYGGE

Type: air-to-water heat pump

Outdoor unit model: MHA-V16WD2RN8-E

Nominal heating capacity: 15.50 kW

COP at A7/W35: 4.61

Maximum heating capacity EN14511:

A7/W35: 16.72 kW

A-15/W35: 15.85 kW

A-15/W50: 11.99 kW

A-20/W50: 11.69 kW

SCOP EN14825, average climate, W35: 4.93

SCOP EN14825, cold climate, W35: 4.55

Energy efficiency class W35/W55: A+++/A+++

Nominal cooling capacity A35/W18: 10 kW

Maximum heating / water temperature: 65/60 °C

Sound pressure level A7/W35: 46/43/40 dB(A)

Sound pressure level A-7/W55: 48/45/43 dB(A)

Silent mode at 1 m: 43/39/36 dB(A)

Silent mode at 2 m: 40/37/34 dB(A)

Dimensions (W × H × D): 1051 × 1330 × 475 mm

Net / gross weight: 130.5 / 153.5 kg

Compressor: EVI DC Twin Rotary

Refrigerant: R32

Expansion valve: EEV

Refrigerant pipe size: 9.52 / 15.9 mm

Maximum refrigerant pipe length: 30 m

Pre-charged refrigerant pipe length: 15 m

Maximum height difference between indoor and outdoor units: 20 m

Power supply: 380–415 V / 3 Ph / 50 Hz

Fuse size: 16 A

Heating operating range: -28 to +35 °C

DHW operating range: -28 to +43 °C.

Technical information – indoor unit HBT-A160/240CDS90GN8-E

Type: indoor unit with integrated tank

Model: HBT-A160/240CDS90GN8-E

Power supply: 220–240 V / 1 Ph / 50 Hz

Fuse size: 20 A

Dimensions (W × H × D): 600 × 1943 × 600 mm

Integrated tank capacity: 240 l

Net / gross weight: 159 / 180 kg

Three-phase auxiliary electric heater: 9 kW.

HYGGE technologies and design advantages

100% heating capacity at A-15/W35

Leaving-water temperature up to 45 °C at -28 °C ambient temperature

A+++ energy efficiency at both 35 °C and 55 °C water temperatures

Dragonfly bionic fan-blade design

High sound-insulation material

Two-stage vibration-isolation structure

Low-frequency response pipe

Opening electronic control box

Flow-Ease water-pipe design

Good corrosion resistance

High thermal-insulation performance

Reduced water resistance

Reduced energy consumption

Lower weight for easier transportation and installation

Quick connection for easier servicing.