MIDEA HUGGE 16.0kW air-to-water heat pump MHA-V16WD2RN8-E / HB-A160CDS90GN8-E, R32

7011.95 EUR  5050.00 EUR

Datu lapa

- +

Add to cart

Midea M thermal HYGGE is an air-to-water heat pump system designed for heating, cooling and domestic hot-water production. This combination consists of the MHA-V16WD2RN8-E outdoor unit and the HB-A160CDS90GN8-E hydraulic indoor unit without an integrated storage tank.

The HYGGE range is designed for operation at low outdoor temperatures. According to the Midea brochure, 100% heating capacity is maintained at A-15/W35, while a leaving-water temperature of up to 45 °C is available even at an ambient temperature of -28 °C.

The MHA-V16WD2RN8-E has a nominal heating capacity of 15.50 kW at A7/W35 and a COP of 4.61. Maximum heating capacity is 16.72 kW at A7/W35, 15.85 kW at A-15/W35, 11.99 kW at A-15/W50 and 11.69 kW at A-20/W50. SCOP at W35 is 4.93 for an average climate and 4.55 for a cold climate. Energy efficiency class at W35/W55 is A+++/A+++.

The system uses R32 refrigerant, an EVI DC Twin Rotary compressor and an EEV electronic expansion valve. The heating operating range is -28 to +35 °C, while the domestic hot-water operating range is -28 to +43 °C.

Noise-reduction features include the Dragonfly bionic fan-blade design, high sound-insulation material, a two-stage vibration-isolation structure and a low-frequency response pipe. For the HYGGE 12–16 kW range, the brochure specifies sound pressure of ≤46 dB(A).

The HB-A160CDS90GN8-E is a hydraulic indoor unit without an integrated hot-water tank. The HYGGE hydraulic system shown in the brochure includes an air vent valve, water flow switch, plate heat exchanger, pump, electric heater, expansion vessel and pressure relief valve. The opening electronic control box and Flow-Ease water pipe are designed to simplify installation and maintenance.

Technical information – outdoor unit MHA-V16WD2RN8-E

Manufacturer: Midea

Series: M thermal HYGGE

Type: air-to-water heat pump

Outdoor unit model: MHA-V16WD2RN8-E

Nominal heating capacity A7/W35: 15.50 kW

COP A7/W35: 4.61

Maximum heating capacity EN14511:

A7/W35: 16.72 kW

A-15/W35: 15.85 kW

A-15/W50: 11.99 kW

A-20/W50: 11.69 kW

SCOP EN14825, average climate, W35: 4.93

SCOP EN14825, cold climate, W35: 4.55

Energy efficiency class W35/W55: A+++/A+++

Nominal cooling capacity A35/W18: 10 kW

Maximum heating / water temperature: 65/60 °C

Sound pressure level, heating A7/W35: 46/43/40 dB(A)

Sound pressure level, heating A-7/W55: 48/45/43 dB(A)

Silent mode at 1 m: 43/39/36 dB(A)

Silent mode at 2 m: 40/37/34 dB(A)

Dimensions (W × H × D): 1051 × 1330 × 475 mm

Net / gross weight: 130.5 / 153.5 kg

Compressor: EVI DC Twin Rotary

Refrigerant: R32

Expansion valve type: EEV

Refrigerant pipe size: 9.52 / 15.9 mm

Maximum refrigerant pipe length: 30 m

Pre-charged refrigerant pipe length: 15 m

Maximum height difference between indoor and outdoor units: 20 m

Power supply: 380–415 V / 3 Ph / 50 Hz

Fuse size: 16 A

Heating operating range: -28 to +35 °C

DHW operating range: -28 to +43 °C.

Technical information – indoor unit HB-A160CDS90GN8-E

Indoor unit type: hydraulic indoor unit without integrated tank

Model: HB-A160CDS90GN8-E

Power supply: 220–240 V / 1 Ph / 50 Hz

Fuse size: 10 A

Dimensions (W × H × D): 420 × 790 × 270 mm

Net / gross weight: 33 / 37 kg

3-phase auxiliary electric heater: 9 kW.

HYGGE technologies and design features

100% heating capacity at A-15/W35

Leaving-water temperature up to 45 °C at -28 °C ambient temperature

A+++ energy efficiency class at W35 and W55

Dragonfly bionic fan-blade design

High sound-insulation material

Two-stage vibration-isolation structure

Low-frequency response pipe

Opening electronic control box

Flow-Ease water-pipe design

Good corrosion resistance

High thermal-insulation performance

Lower water resistance

Reduced energy consumption

Lower weight for easier transport and installation

Quick connection for easier maintenance.