🚚 Delivery Price Calculator
Approximate price estimate · Prices include VAT
1. Select delivery country
Estimated delivery price
—
⚠ Informational estimate only. Actual price may vary depending on item weight, dimensions and courier conditions. The seller reserves the right to issue an additional invoice. Contact us for exact pricing: +371 29287710 · [email protected]
🚚 Delivery Price Calculator
TOP SANTEHNIKA.LV official dealer:
* ESTO only in Estonia, Latvia, Lithuania
Heat pump FERROLI OMNIA ST 3.2 04 for split installation with 190 liter boiler, 0XHT4SWA
Nominal cooling capacity: 4kW
Nominal heating capacity: 4kW
Indoor unit noise level : 42dB(A)
Outdoor unit noise level : 55dB(A)
Indoor block weight: 192kg
Weight of outdoor unit: 58kg
Refrigerant: R32
Dimensions of the indoor unit (WxHxD): 595x700x1860mm
SCOP for heating - class: A+++
Water capacity: 190l
• The new complete inverter split-system heat pump series with refrigerant R32, which has a low environmental impact.
• This product range consists of an outdoor unit that houses the most important elements of the cooling circuit, which is connected to an indoor unit with coolant pipes.
• An indoor unit containing the main components of the heat source water circuit, with a pre-installed circulation pump and expansion vessel, as well as an integrated water heater to.
• The indoor unit is also equipped with an electric heater with a capacity of 3 kW for single-phase models and 6 kW for three-phase models.
• OMNIA ST 3.2 models differ from OMNIA S 3.2 models in that they have an integrated hot water tank located directly in the indoor unit.
• Models with a capacity of 4 to 10 kW have a hot water tank volume of 190 liters, while models with a capacity of 12 to 16 T kW have a tank volume of 240 liters. This water heater can be equipped with an additional electric heater (supplied separately) or a solar thermal collector (supplied separately).
• Installing a split system also has a significant advantage as it eliminates the problem of freezing even at the lowest temperatures and when there is no electricity. All units meet the most extreme winter and summer air conditioning requirements for small and medium-sized systems, they can produce hot water up to 65 °C, so they are suitable for practically all heating systems - both floors, fan coils and radiators.
• The new Ferroli Full Inverter design uses DC inverter modulation for the three main energy consumption components of the heat pump namely the three main energy consumption components viz. i.e. compressor, fan and pump.
• It allows the modulation of the distributed power, precisely following the heat load, thus achieving very high energy efficiency and significant energy savings for the end user.
• In addition, Ferroli's full inverter design reduces the inrush current, thus eliminating fluctuations in the power supply of the power grid. The noise level is one of the lowest on the market, so it can be used as the only heat source in the system.
