FERROLI PEGASO ECO 14 (LPG) instantaneous gas water heater, GCC1PLAA

FERROLI PEGASO ECO 14 (LPG) GCC1PLAA is a wall-mounted instantaneous gas water heater with an open combustion chamber and natural draught. It is designed for domestic hot-water production and operation with LPG.

Manufacturer code GCC1PLAA identifies the PEGASO ECO 14 LPG version. FERROLI technical documentation specifies operating data for G31/G30 propane and butane gases.

Maximum heat input is 26.8 kW and minimum heat input is 10.7 kW. Useful heat output is modulated from 9.3 to 23.8 kW, allowing gas consumption to be matched to actual hot-water demand.

PEGASO ECO 14 provides up to 13.6 l/min at ΔT 25 °C and 11.4 l/min at ΔT 30 °C. Maximum operating water temperature is 65 °C.

The modulating burner and adjustable water flow help maintain the required hot-water temperature while reducing unnecessary fuel consumption. Maximum efficiency is 87%.

The heat exchanger is manufactured from copper tubes and externally protected with an anti-corrosion aluminium treatment. The low-emission burner meets NOx Class 6; for G31/G30 LPG FERROLI specifies less than 72.8 mg/kWh.

Electronic ignition operates without a permanent pilot flame. The appliance uses a 3 V DC battery power supply, so a 230 V mains connection is not required for normal operation.

The control panel includes a display showing hot-water temperature, burner operation and battery status. Heat output and water temperature can be adjusted using ergonomic controls.

For LPG operation, FERROLI specifies 37 mbar for G31 propane and 29 mbar for G30 butane. Maximum gas consumption is 2.08 / 2.11 kg/h, while minimum consumption is 0.83 / 0.84 kg/h.

Maximum water operating pressure is 10 bar and minimum pressure is 0.2 bar. Gas, cold-water and hot-water connections are all ½".

PEGASO ECO 14 is a B11BS atmospheric appliance with an open combustion chamber and natural draught. Flue outlet diameter for the 14 model is Ø130 mm. Installation must comply with applicable gas, ventilation and flue regulations.

Overall body dimensions are 650 × 400 × 187 mm (H × W × D) and empty net weight is 13.5 kg. Protection rating is IPX4D.

FERROLI PEGASO ECO 14 LPG GCC1PLAA combines high domestic hot-water output, modulating heat power, electronic ignition, a copper heat exchanger and low NOx emissions in a compact wall-mounted design.

Key advantages

• LPG version – GCC1PLAA.
• DHW flow up to 13.6 l/min.
• Maximum heat input 26.8 kW.
• Useful heat output 9.3–23.8 kW.
• Modulating burner.
• Maximum water temperature 65 °C.
• Electronic ignition without permanent pilot flame.
• Battery powered – no 230 V supply required.
• Copper heat exchanger with anti-corrosion treatment.
• NOx Class 6.
• ErP energy class A.
• Load profile M.
• Compact dimensions and 13.5 kg net weight.

Technical information