DRAŽICE OKC 100/1 m² combined water heater 95 l, 2.2 kW, 1.08 m² heat exchanger, vertical

DRAŽICE OKC 100/1 m² is a vertical combined hot water heater equipped with an electric heating element and an enlarged heat exchanger. Designed for wall mounting, it allows domestic hot water to be heated either by the 2.2 kW electric heating element or by an external heating system heat source.

The OKC 100/1 m² version features a 1.08 m² heat exchanger, making it particularly suitable for connection to boilers using various fuels as well as condensing boilers. The heat exchanger volume is 7.1 litres and its rated thermal output reaches 24 kW at a heating water temperature of 80 °C and a flow rate of 720 l/h.

When using the heat exchanger, water can be heated from 10 to 60 °C in approximately 14 minutes under the manufacturer's specified conditions. This makes the model particularly suitable for systems requiring rapid domestic hot water preparation from an external heat source.

Electric water heating is provided by a 2.2 kW ceramic heating element. The electric heating time from 10 to 60 °C is approximately 2.5 hours. The electrical connection is 1/N/PE ~ 230 V / 50 Hz and the electrical protection rating is IP44.

The actual tank capacity of the DRAŽICE OKC 100/1 m² is 95 litres. The maximum operating temperature in the tank is 80 °C and the maximum operating pressure is 6 bar. The heat exchanger permits a heating water temperature of up to 110 °C and an operating pressure of up to 10 bar.

The storage tank is equipped with a circulation connection and is designed for vertical wall mounting. 42 mm thermal insulation with a thermal conductivity of 0.022 W/(m·K) helps reduce heat loss. The model has energy efficiency class B and static heat loss of 47 W.

Technical information